legacycentral bbs

I am playing with th idea of installing a Dastek Unichip and having it tuned on a dyno. None of the dealers in my area have a 4WD dyno. If I were to just drop the driveline to my rear diff and run the car on their dyno as 2WD, would that work?

Does anyone have any opinions about the Dastek Unichip? Does anyone know of anyone who is running one on a Legacy Turbo? Does anyone know of a hot deal on a used one?

Bill Robinson
92 Legacy Turbo


<http://rd.yahoo.com/M=190481.1393724.29 ... direct.com> www.newaydirect.com
<http://us.adserver.yahoo.com/l?M=190481 ... =183946055>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .

hi m8 gunna fit a dasteck chip soon waiting for mrt exhaust .induction kit, you need thease to get the most out of it. yes if your car is four wheel drive you need four wheel dyno.

----- Original Message -----
From: William D. Robinson <mailto:vultureboy@mindspring.com>
To: BC-BFLegacyWorks@yahoogroups.com
Sent: Wednesday, May 09, 2001 60 PM
Subject: [BC-BFLegacyWorks] Dastek Unichip

I am playing with th idea of installing a Dastek Unichip and having it tuned on a dyno. None of the dealers in my area have a 4WD dyno. If I were to just drop the driveline to my rear diff and run the car on their dyno as 2WD, would that work?

Does anyone have any opinions about the Dastek Unichip? Does anyone know of anyone who is running one on a Legacy Turbo? Does anyone know of a hot deal on a used one?

Bill Robinson
92 Legacy Turbo


To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .




<http://rd.yahoo.com/M=172061.1388559.29 ... HYHACP0007> E*TRADE. It's your money
<http://us.adserver.yahoo.com/l?M=172061 ... =340044879>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .

I would test before chip after chip so you have a comparison.

No you can't just drop the drive line. The centre diff would still be
trying to drive the rear wheels, therefore reducing the drive ratio
to your front wheels. You would need to lock the centre diff to get a
decent reading.

Some models of legacy's have a diff lock option, you could jack the
rear wheels off the ground put lots of blocks under the rear of the
car so the car doesn't try to launch it's self off the dyno.

Dan

--- In BC-BFLegacyWorks@y..., "William D. Robinson" <vultureboy@m...>
wrote:
> I am playing with th idea of installing a Dastek Unichip and having
it tuned on a dyno. None of the dealers in my area have a 4WD dyno.
If I were to just drop the driveline to my rear diff and run the car
on their dyno as 2WD, would that work?
>
> Does anyone have any opinions about the Dastek Unichip? Does
anyone know of anyone who is running one on a Legacy Turbo? Does
anyone know of a hot deal on a used one?
>
> Bill Robinson
> 92 Legacy Turbo


To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com