Page 1 of 1
Front sway bar mount flexing too much, cracking crossmember
Posted: Mon Feb 09, 2015 4:36 am
by rallyak
Is there a aftermarket bracket that will stiffen the sway bar mount to keep this from happening. Mine is cracked on both sides and cracked thru to the top side of the crossmember. Right now I can weld it up but I believe it will crack out again. Has anyone else had this happen? How did you prevent it.
Re: Front sway bar mount flexing too much, cracking crossmem
Posted: Mon Feb 09, 2015 5:15 am
by jamal
Not that I know of. Newer subframes have a stronger swaybar mount though. 96-99 LGT and 02-04 impreza off the top of my head will work and have the same steering rack mounts. Impreza has a wider front control arm bushing by a little bit.
Re: Front sway bar mount flexing too much, cracking crossmem
Posted: Mon Feb 09, 2015 6:43 pm
by Legacy777
What size front anti-sway bar are you using?
Re: Front sway bar mount flexing too much, cracking crossmem
Posted: Mon Feb 09, 2015 7:21 pm
by rallyak
I have a 22mm white line bar up front.
