Page 1 of 1

Running an ej22 with an ej22t ECU

Posted: Mon May 11, 2015 2:09 am
by Abeall2
I have a spare naturally aspirated ej22 that I want to just throw in my car so I can drive it till I rebuild my ej22t, will my EJ22t ecu run this engine with no problems?

Re: Running an ej22 with an ej22t ECU

Posted: Mon May 11, 2015 5:35 pm
by Legacy777
The simple answer is no it won't, or at least not very well. The fuel injectors on the turbo motor are larger. So if you run the non-turbo injectors the ECU won't like that.

Some people have run the non-turbo ECU in the turbo chassis. You would just need to swap the positive pins for the crank & cam sensors at the ECU. Those sensors are wired backwards between the non-turbo and turbo cars.

Re: Running an ej22 with an ej22t ECU

Posted: Mon May 11, 2015 5:48 pm
by wtdash
Hi,
Since your Sig states yours is a swap - like my original Legacy - you know what needs done to make it fit. I'd do the following:

- Swap injectors (or just do the whole IM)
- Run WG boost
- Run 93 Octane min.
- Monitor your AFR's and Knock, if possible


And don't drive it like it's an EJ22T.

TD