legacycentral bbs

My steering rack bushings are completely shot.

Autoshop don't sell them but I found a bunch on ebay!:)

Do you guys know if they are split so I don't have to remove tie rods to slide them in, or they come in one full piece so I do have to remove tie rods to install the bushings?

Also anybody remembers whats the steering rack diameter just to make sure I buy the right stuff (sub legacy wag 92)

Thanks!

http://www.ebay.com/sch/Steering-Racks- ... ng&_sop=15

It looks like some do and some don't...

Obviously the first two are split bushings, sorry just got done working on the car I'm tired lol

They are split. You unbolt the mounts and the u-joint (mark where it is), slide it down, and slip the new bushings on. Not too hard as long as you get the rack down a bit and none of the bolts break off in the subframe. The fitment guide on the first ebay result for the whitelines I clicked on was not right btw.

Thanks Jamal!

If you're getting whiteline, you want the KSR202's.

http://www.amazon.com/Whiteline-KSR202- ... B004ZZVM8K