legacycentral bbs

Posted: **Fri Jul 06, 2001 4:34 pm**

Anyone have any ideas about the automatic belt system
being stuck half way on
the track? my 91 legacy had the seatbelt move towards
the open position and the
belt itself tightened up, and did not allow the
mechanisam to go all the way
forward. I disconnected the belt from the mechanism
and hoped that it would go
to the correct position. Needless to say it did not do
it on its own and me
trying to push it back did not work. Any Ideas?

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Posted: **Fri Jul 06, 2001 4:37 pm**

mine does that occasionally, but I just disconnect the belt, and it goes
down by itself. You might want to check fuses, the motor could have
overloaded the circuit and blown a fuse.

Not sure what else to suggest.

Josh

************************************
Josh Colombo
jcc189@psu.edu <mailto:jcc189@psu.edu>

"Life, an ever-changing melody
of beats and rhythm" - ME
************************************

-----Original Message-----
From: sean john [mailto:r32657@yahoo.com]
Sent: Friday, July 06, 2001 4:33 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Seat belt

Anyone have any ideas about the automatic belt system
being stuck half way on
the track? my 91 legacy had the seatbelt move towards
the open position and the
belt itself tightened up, and did not allow the
mechanisam to go all the way
forward. I disconnected the belt from the mechanism
and hoped that it would go
to the correct position. Needless to say it did not do
it on its own and me
trying to push it back did not work. Any Ideas?

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com