Urgent !!! Help! Help! Help! engine trouble
Posted: Sat Jul 07, 2001 11:33 am
It started about a week ago when I was driving along, if I took my foot of the throtle down hills the engine started making a tapping noise!!! If I revved the engine it would go away. I pulled in straight away and checked the way and checked the oil level, which was fine. So I drove home very slowly and could keep hearing the tapping noise coming and going as I drove!!! I have now changed the oil filter and oil aswell but the noise seems to be getting worse and worse!! what can I do Is my engine damaged some how ???
please help me I'm desperate there is no way I can survive without my car and a second hand engine is going to cost more then I can ever afford (£1000)
I am waiting at my PC for you replys
thx sooo much in advance
¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø¤º°`°º¤ø,¸¸,¤º°`°º¤ø,¸¸
Info: John Carlsson UK 92 Legacy 4 cam Turbo Estate
E-mail : penty@nettaxi.com < mailto:penty@nettaxi.com>
¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø¤º°`°º¤ø,¸¸,¤º°`°º¤ø,¸¸
-----Original Message-----
From: Josh Colombo [ mailto:jcc189@psu.edu]
Sent: 06 July 2001 21:37
To: BC-BFLegacyWorks@yahoogroups.com
Subject: RE: [BC-BFLegacyWorks] Seat belt
mine does that occasionally, but I just disconnect the belt, and it goes
down by itself. You might want to check fuses, the motor could have
overloaded the circuit and blown a fuse.
Not sure what else to suggest.
Josh
************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: sean john [ mailto:r32657@yahoo.com]
Sent: Friday, July 06, 2001 4:33 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Seat belt
Anyone have any ideas about the automatic belt system
being stuck half way on
the track? my 91 legacy had the seatbelt move towards
the open position and the
belt itself tightened up, and did not allow the
mechanisam to go all the way
forward. I disconnected the belt from the mechanism
and hoped that it would go
to the correct position. Needless to say it did not do
it on its own and me
trying to push it back did not work. Any Ideas?
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .
please help me I'm desperate there is no way I can survive without my car and a second hand engine is going to cost more then I can ever afford (£1000)
I am waiting at my PC for you replys
thx sooo much in advance
¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø¤º°`°º¤ø,¸¸,¤º°`°º¤ø,¸¸
Info: John Carlsson UK 92 Legacy 4 cam Turbo Estate
E-mail : penty@nettaxi.com < mailto:penty@nettaxi.com>
¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø¤º°`°º¤ø,¸¸,¤º°`°º¤ø,¸¸
-----Original Message-----
From: Josh Colombo [ mailto:jcc189@psu.edu]
Sent: 06 July 2001 21:37
To: BC-BFLegacyWorks@yahoogroups.com
Subject: RE: [BC-BFLegacyWorks] Seat belt
mine does that occasionally, but I just disconnect the belt, and it goes
down by itself. You might want to check fuses, the motor could have
overloaded the circuit and blown a fuse.
Not sure what else to suggest.
Josh
************************************
Josh Colombo
jcc189@psu.edu < mailto:jcc189@psu.edu>
"Life, an ever-changing melody
of beats and rhythm" - ME
************************************
-----Original Message-----
From: sean john [ mailto:r32657@yahoo.com]
Sent: Friday, July 06, 2001 4:33 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Seat belt
Anyone have any ideas about the automatic belt system
being stuck half way on
the track? my 91 legacy had the seatbelt move towards
the open position and the
belt itself tightened up, and did not allow the
mechanisam to go all the way
forward. I disconnected the belt from the mechanism
and hoped that it would go
to the correct position. Needless to say it did not do
it on its own and me
trying to push it back did not work. Any Ideas?
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com
zZz <http://docs.yahoo.com/info/terms/> .