legacycentral bbs

How to remove the camshaft-sprockets on a quad-cam Legacy (2.0l turbo) ?
There is nothing obvious to hold it in place when trying to loosen the
nut.

Any advice is appreciated

/Jesper





------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/zoU8wD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

You're actually going to need a special tool. What the tool does is hold
each sproket on each side in place so they cannot rotate. You'll need to get
ahold of your local subaru dealership to purchase one so far as i know.

-Jason


>From: Jesper Kierkegaard <jesper.kierkegaard@studsvik.se>
>Reply-To: BC-BFLegacyWorks@yahoogroups.com
>To: BC-BFLegacyWorks@yahoogroups.com
>Subject: [BC-BFLegacyWorks] Camshaft sprockets
>Date: Thu, 30 Aug 2001 00:419 +0200 (CEST)
>
>
>How to remove the camshaft-sprockets on a quad-cam Legacy (2.0l turbo) ?
>There is nothing obvious to hold it in place when trying to loosen the
>nut.
>
>Any advice is appreciated
>
>/Jesper
>
>
>
>
>
>
>To unsubscribe from this group, please send an email to:
>BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/zoU8wD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Ha! I was going to offer to loan him mine... then I looked at his e-mail
address. )

-Sambo

-----Original Message-----
From: jason grahn [mailto:jgrahn555@hotmail.com]
Sent: Wednesday, August 29, 2001 3:51 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] Camshaft sprockets


You're actually going to need a special tool. What the tool does is hold
each sproket on each side in place so they cannot rotate. You'll need to get
ahold of your local subaru dealership to purchase one so far as i know.

-Jason


>From: Jesper Kierkegaard <jesper.kierkegaard@studsvik.se>
>Reply-To: BC-BFLegacyWorks@yahoogroups.com
>To: BC-BFLegacyWorks@yahoogroups.com
>Subject: [BC-BFLegacyWorks] Camshaft sprockets
>Date: Thu, 30 Aug 2001 00:419 +0200 (CEST)
>
>
>How to remove the camshaft-sprockets on a quad-cam Legacy (2.0l turbo) ?
>There is nothing obvious to hold it in place when trying to loosen the
>nut.
>
>Any advice is appreciated
>
>/Jesper
>
>
>
>
>
>
>To unsubscribe from this group, please send an email to:
>BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp



To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com







------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/zoU8wD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Isnt he just around the corner?
hehe
Mark
At 10:36 PM 29/08/2001 -0700, you wrote:
>Ha! I was going to offer to loan him mine... then I looked at his e-mail
>address. )
>
>-Sambo
>
>-----Original Message-----
>From: jason grahn [mailto:jgrahn555@hotmail.com]
>Sent: Wednesday, August 29, 2001 3:51 PM
>To: BC-BFLegacyWorks@yahoogroups.com
>Subject: Re: [BC-BFLegacyWorks] Camshaft sprockets
>
>
>You're actually going to need a special tool. What the tool does is hold
>each sproket on each side in place so they cannot rotate. You'll need to get
>ahold of your local subaru dealership to purchase one so far as i know.
>
>-Jason
>
>
> >From: Jesper Kierkegaard <jesper.kierkegaard@studsvik.se>
> >Reply-To: BC-BFLegacyWorks@yahoogroups.com
> >To: BC-BFLegacyWorks@yahoogroups.com
> >Subject: [BC-BFLegacyWorks] Camshaft sprockets
> >Date: Thu, 30 Aug 2001 00:419 +0200 (CEST)
> >
> >
> >How to remove the camshaft-sprockets on a quad-cam Legacy (2.0l turbo) ?
> >There is nothing obvious to hold it in place when trying to loosen the
> >nut.
> >
> >Any advice is appreciated
> >
> >/Jesper
> >
> >
> >
> >
> >
> >
> >To unsubscribe from this group, please send an email to:
> >BC-BFLegacyWorks-unsubscribe@egroups.com
> >
> >
> >
> >
> >
> >
>
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>
>
>
>To unsubscribe from this group, please send an email to:
>BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>
>
>
>To unsubscribe from this group, please send an email to:
>BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/zoU8wD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

It was a good intention, but as you realized it's not an option. (I'm
in Sweden) I will try to find someone closer with the tool or build my
own.

Thanks anyway

/Jesper


--- In BC-BFLegacyWorks@y..., "Samuel Barrett" <LEVATHIAN@s...> wrote:
> Ha! I was going to offer to loan him mine... then I looked at his
e-mail
> address. )
>
> -Sambo
>
> -----Original Message-----
> From: jason grahn [mailto:jgrahn555@h...]
> Sent: Wednesday, August 29, 2001 3:51 PM
> To: BC-BFLegacyWorks@y...
> Subject: Re: [BC-BFLegacyWorks] Camshaft sprockets
>
>
> You're actually going to need a special tool. What the tool does is
hold
> each sproket on each side in place so they cannot rotate. You'll
need to get
> ahold of your local subaru dealership to purchase one so far as i
know.
>
> -Jason
>
>
> >From: Jesper Kierkegaard <jesper.kierkegaard@s...>
> >Reply-To: BC-BFLegacyWorks@y...
> >To: BC-BFLegacyWorks@y...
> >Subject: [BC-BFLegacyWorks] Camshaft sprockets
> >Date: Thu, 30 Aug 2001 00:419 +0200 (CEST)
> >
> >
> >How to remove the camshaft-sprockets on a quad-cam Legacy (2.0l
turbo) ?
> >There is nothing obvious to hold it in place when trying to loosen
the
> >nut.
> >
> >Any advice is appreciated
> >
> >/Jesper
> >
> >
> >
> >
> >
> >
> >To unsubscribe from this group, please send an email to:
> >BC-BFLegacyWorks-unsubscribe@egroups.com
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/zoU8wD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com