legacycentral bbs

OK Well Here goes again..i kinda get tired of saying this over and over..I
hope that one day we can actually go about and do this..

"I would love to have these and was amazed at how
low the prices he was talking about were. "

Well, OK the way it works is 5 people including myself go in on this.. If
this is done individual prices could be lower than the $200.oo mark.. But it
goes really sky high for one or 2 pieces so it's not finically reasonable to
do one or 2 pieces..

". I couldn't figure out what
happened...did these ever get made? "

Unfortunately, there WAS much interest.. but to many circumstances for all
those interested that we could never have 5 or more people onboard to make an
order..

"Could they still be? "

Yea I have to contact my guy again..but the prices are still good, only thing
is finding parts to make molds from. But that can be addressed if this is a
subject other would wish me to persue..again..



is there
any interest?

Well, looking at the poll I put up over a year ago...there are 56 interested
individuals but..i haven't been approached recently about it till now..

OK IN REVIEW..for all the new people

I was haveing a local fiberglass guy price me out work on the following parts
for the legacy..

RS Style Bumper FOR THE LEGACY
RS Style Fiberglass Hood with Vents
Fiberglass Front fenders *recomend race only*
Fiberglass Parts in general..*recomend race only*

the way it works is there is a mold cost.. 30 dollars per square foot.. a RS
bumper has 8.1 square feet of area.. which = a mold cost of $243.00

Each part will be made at 25% a quarter of the cost of the mold cost..which
is $60.75

Well, I don't have a spare RSbumper layen around how bout you? Me neither
so.. a new one to make a mold from costs *since the last time I looked*
$249.00 from the dealership..

Well, gee we're up to 552.75 for one part woo hoo..now granted for one part I
would just have a body shop MAKE the RS bumper Fit my car and be off..BUT you
want one too.. So we take a normal RS bumper Make it fit a year Legacy..make
all the mounting and shaving ahead of time..make the mold and pop out, ready
to bolt on parts you can throw on your car..woo hoo..

So..
Mold price: 243.00
part price 60.75
5people 60.75
60.75
60.75
60.75
RSBumper249.00
-----------------------------------
Equals = 795.75
divided 5 ways is: 159.15...gee an RS bumper that fits your car..for hmm
under 200 bucks..

Now I am not including shipping..cause I don't know the final weight until
it's finished..

On a side note.. my quad headlamp design for my 91 subaru wgn has come back
from the blueprint office..so now to find a machine shop..

Now.. Again if there are interested parties.. we can continue this subject..
I am always ready..

David Carter








ADVERTISEMENT



<http://us.a1.yimg.com/us.yimg.com/a/di/ ... _11_12.gif> <http://us.a1.yimg.com/us.yimg.com/a/di/ ... rt/111.jpg>
<http://us.a1.yimg.com/us.yimg.com/a/di/ ... rkblue.gif> Start here...
<http://us.a1.yimg.com/us.yimg.com/a/di/ ... /clear.gif>
Height:
3 4 5 6 7 8 ft 0 1 2 3 4 5 6 7 8 9 10 11 in
<http://us.a1.yimg.com/us.yimg.com/a/di/ ... /clear.gif>
Weight:
lbs. kg.

<http://us.a1.yimg.com/us.yimg.com/a/di/ ... /clear.gif>
<http://us.a1.yimg.com/us.yimg.com/a/di/ ... rt/333.gif>

<http://us.adserver.yahoo.com/l?M=210544 ... =934530735>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .

I am still interested in the bumper for sure and possibly the hood.
BTW, somebody is selling the RS bumper skin on ebay. 6 days left. The
biddings up to $75.

Ian D.
93 Legacy Turbo


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/47cccB/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Well, I am definately interested. I would actually be willing to
commit, here and now, to being in for the hood I would also be in
for the bumper. Does anyone w/ photoshop skills have any interest in
making an attempt at showing us this? As for fenders, only the
flares would interest me, and I just couldn't say without seeing them.
But anyway, I am in and committed (financially) for bumper and hood.
My only concern: was there a front end revision in 92? I have a
91...will this fit all 91-94's?
Thanks
Micum
91 Legay Turbo Sport EJ20-RA


--- In BC-BFLegacyWorks@y..., bussaca2@a... wrote:
> OK Well Here goes again..i kinda get tired of saying this over and
over..I
> hope that one day we can actually go about and do this..
>
> "I would love to have these and was amazed at how
> low the prices he was talking about were. "
>
> Well, OK the way it works is 5 people including myself go in on
this.. If
> this is done individual prices could be lower than the $200.oo
mark.. But it
> goes really sky high for one or 2 pieces so it's not finically
reasonable to
> do one or 2 pieces..
>
> ". I couldn't figure out what
> happened...did these ever get made? "
>
> Unfortunately, there WAS much interest.. but to many circumstances
for all
> those interested that we could never have 5 or more people onboard
to make an
> order..
>
> "Could they still be? "
>
> Yea I have to contact my guy again..but the prices are still good,
only thing
> is finding parts to make molds from. But that can be addressed if
this is a
> subject other would wish me to persue..again..
>
>
>
> is there
> any interest?
>
> Well, looking at the poll I put up over a year ago...there are 56
interested
> individuals but..i haven't been approached recently about it till
now..
>
> OK IN REVIEW..for all the new people
>
> I was haveing a local fiberglass guy price me out work on the
following parts
> for the legacy..
>
> RS Style Bumper FOR THE LEGACY
> RS Style Fiberglass Hood with Vents
> Fiberglass Front fenders *recomend race only*
> Fiberglass Parts in general..*recomend race only*
>
> the way it works is there is a mold cost.. 30 dollars per square
foot.. a RS
> bumper has 8.1 square feet of area.. which = a mold cost of $243.00
>
> Each part will be made at 25% a quarter of the cost of the mold
cost..which
> is $60.75
>
> Well, I don't have a spare RSbumper layen around how bout you? Me
neither
> so.. a new one to make a mold from costs *since the last time I
looked*
> $249.00 from the dealership..
>
> Well, gee we're up to 552.75 for one part woo hoo..now granted for
one part I
> would just have a body shop MAKE the RS bumper Fit my car and be
off..BUT you
> want one too.. So we take a normal RS bumper Make it fit a year
Legacy..make
> all the mounting and shaving ahead of time..make the mold and pop
out, ready
> to bolt on parts you can throw on your car..woo hoo..
>
> So..
> Mold price: 243.00
> part price 60.75
> 5people 60.75
> 60.75
> 60.75
> 60.75
> RSBumper249.00
> -----------------------------------
> Equals = 795.75
> divided 5 ways is: 159.15...gee an RS bumper that fits your
car..for hmm
> under 200 bucks..
>
> Now I am not including shipping..cause I don't know the final
weight until
> it's finished..
>
> On a side note.. my quad headlamp design for my 91 subaru wgn has
come back
> from the blueprint office..so now to find a machine shop..
>
> Now.. Again if there are interested parties.. we can continue this
subject..
> I am always ready..
>
> David Carter


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/47cccB/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

David,

I'm in on the headlights, I know I talked to you before about this, but I am really interested about them, Any ideas on price or time table yet? If you have any sketches that you wouldn't mind sharing I would love to see what they look like. Email me personally if you want.

Thanks

Josh

************************************
Josh Colombo
jcc189@psu.edu

"Life, an ever-changing melody
of beats and rhythm" - ME
************************************

-----Original Message-----
From: bussaca2@aol.com [mailto:bussaca2@aol.com]
Sent: Wednesday, September 05, 2001 11:33 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] David Carter? fiberglass body kits? are you/they out t...


OK Well Here goes again..i kinda get tired of saying this over and over..I
hope that one day we can actually go about and do this..

"I would love to have these and was amazed at how
low the prices he was talking about were. "

Well, OK the way it works is 5 people including myself go in on this.. If
this is done individual prices could be lower than the $200.oo mark.. But it
goes really sky high for one or 2 pieces so it's not finically reasonable to
do one or 2 pieces..

". I couldn't figure out what
happened...did these ever get made? "

Unfortunately, there WAS much interest.. but to many circumstances for all
those interested that we could never have 5 or more people onboard to make an
order..

"Could they still be? "

Yea I have to contact my guy again..but the prices are still good, only thing
is finding parts to make molds from. But that can be addressed if this is a
subject other would wish me to persue..again..



is there
any interest?

Well, looking at the poll I put up over a year ago...there are 56 interested
individuals but..i haven't been approached recently about it till now..

OK IN REVIEW..for all the new people

I was haveing a local fiberglass guy price me out work on the following parts
for the legacy..

RS Style Bumper FOR THE LEGACY
RS Style Fiberglass Hood with Vents
Fiberglass Front fenders *recomend race only*
Fiberglass Parts in general..*recomend race only*

the way it works is there is a mold cost.. 30 dollars per square foot.. a RS
bumper has 8.1 square feet of area.. which = a mold cost of $243.00

Each part will be made at 25% a quarter of the cost of the mold cost..which
is $60.75

Well, I don't have a spare RSbumper layen around how bout you? Me neither
so.. a new one to make a mold from costs *since the last time I looked*
$249.00 from the dealership..

Well, gee we're up to 552.75 for one part woo hoo..now granted for one part I
would just have a body shop MAKE the RS bumper Fit my car and be off..BUT you
want one too.. So we take a normal RS bumper Make it fit a year Legacy..make
all the mounting and shaving ahead of time..make the mold and pop out, ready
to bolt on parts you can throw on your car..woo hoo..

So..
Mold price: 243.00
part price 60.75
5people 60.75
60.75
60.75
60.75
RSBumper249.00
-----------------------------------
Equals = 795.75
divided 5 ways is: 159.15...gee an RS bumper that fits your car..for hmm
under 200 bucks..

Now I am not including shipping..cause I don't know the final weight until
it's finished..

On a side note.. my quad headlamp design for my 91 subaru wgn has come back
from the blueprint office..so now to find a machine shop..

Now.. Again if there are interested parties.. we can continue this subject..
I am always ready..

David Carter






To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .





ADVERTISEMENT



<http://us.a1.yimg.com/us.yimg.com/a/di/ ... _11_12.gif> <http://us.a1.yimg.com/us.yimg.com/a/di/ ... rt/111.jpg>
<http://us.a1.yimg.com/us.yimg.com/a/di/ ... rkblue.gif> Start here...
<http://us.a1.yimg.com/us.yimg.com/a/di/ ... /clear.gif>
Height:
3 4 5 6 7 8 ft 0 1 2 3 4 5 6 7 8 9 10 11 in
<http://us.a1.yimg.com/us.yimg.com/a/di/ ... /clear.gif>
Weight:
lbs. kg.

<http://us.a1.yimg.com/us.yimg.com/a/di/ ... /clear.gif>
<http://us.a1.yimg.com/us.yimg.com/a/di/ ... rt/333.gif>

<http://us.adserver.yahoo.com/l?M=210544 ... =296758452>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .

In a message dated 9/6/01 780 PM Eastern Daylight Time, jcc189@psu.edu
writes:




David,

I'm in on the headlights, I know I talked to you before about this, but I
am really interested about them, Any ideas on price or time table yet?



I am to.. Actually about a time table it took me about 5 months to get
blueprints back..I'm gonna have em made outta metal first..and than molded to
fiberglass.. I still need lights.. I'm still looking for normal and high
beams in a 3.5inch Diameter which are still a problem.. so i don't really
have much of a time table..sorry.. I will try to put up pictures ASAP.. ok



ADVERTISEMENT
<http://rd.yahoo.com/M=212508.1587435.31 ... .tf?s=5085>
<http://us.adserver.yahoo.com/l?M=212508 ... =299150117>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .

Hey, no worries on the time table, when you get them done you get them done, same goes with pics too.

Also, what types of lights are you looking for? Is the headlight going to be liike the euro style for the 95-98 legacies, with a projector beam as normal light, and flood high beam? Also, have you thought about making the low beams xenon?

************************************
Josh Colombo
jcc189@psu.edu

"Life, an ever-changing melody
of beats and rhythm" - ME
************************************

-----Original Message-----
From: bussaca2@aol.com [mailto:bussaca2@aol.com]
Sent: Thursday, September 06, 2001 11:19 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: Re: [BC-BFLegacyWorks] David Carter? fiberglass body kits? are you/they out t...


In a message dated 9/6/01 780 PM Eastern Daylight Time, jcc189@psu.edu
writes:




David,

I'm in on the headlights, I know I talked to you before about this, but I
am really interested about them, Any ideas on price or time table yet?



I am to.. Actually about a time table it took me about 5 months to get
blueprints back..I'm gonna have em made outta metal first..and than molded to
fiberglass.. I still need lights.. I'm still looking for normal and high
beams in a 3.5inch Diameter which are still a problem.. so i don't really
have much of a time table..sorry.. I will try to put up pictures ASAP.. ok

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .





ADVERTISEMENT
<http://rd.yahoo.com/M=212508.1587435.31 ... .tf?s=5085>
<http://us.adserver.yahoo.com/l?M=212508 ... =453057420>

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com



zZz <http://docs.yahoo.com/info/terms/> .

I'm up for a hood again, finances are looking better and I'd better do it
before X-mass season gets here.

Gimme an addy, or pay pal would be preffered, but not necessary...

-Sambo

-----Original Message-----
From: czo79@hotmail.com [mailto:czo79@hotmail.com]
Sent: Wednesday, September 05, 2001 10:24 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Re: David Carter? fiberglass body kits? are
you/they out t...


Well, I am definately interested. I would actually be willing to
commit, here and now, to being in for the hood I would also be in
for the bumper. Does anyone w/ photoshop skills have any interest in
making an attempt at showing us this? As for fenders, only the
flares would interest me, and I just couldn't say without seeing them.
But anyway, I am in and committed (financially) for bumper and hood.
My only concern: was there a front end revision in 92? I have a
91...will this fit all 91-94's?
Thanks
Micum
91 Legay Turbo Sport EJ20-RA


--- In BC-BFLegacyWorks@y..., bussaca2@a... wrote:
> OK Well Here goes again..i kinda get tired of saying this over and
over..I
> hope that one day we can actually go about and do this..
>
> "I would love to have these and was amazed at how
> low the prices he was talking about were. "
>
> Well, OK the way it works is 5 people including myself go in on
this.. If
> this is done individual prices could be lower than the $200.oo
mark.. But it
> goes really sky high for one or 2 pieces so it's not finically
reasonable to
> do one or 2 pieces..
>
> ". I couldn't figure out what
> happened...did these ever get made? "
>
> Unfortunately, there WAS much interest.. but to many circumstances
for all
> those interested that we could never have 5 or more people onboard
to make an
> order..
>
> "Could they still be? "
>
> Yea I have to contact my guy again..but the prices are still good,
only thing
> is finding parts to make molds from. But that can be addressed if
this is a
> subject other would wish me to persue..again..
>
>
>
> is there
> any interest?
>
> Well, looking at the poll I put up over a year ago...there are 56
interested
> individuals but..i haven't been approached recently about it till
now..
>
> OK IN REVIEW..for all the new people
>
> I was haveing a local fiberglass guy price me out work on the
following parts
> for the legacy..
>
> RS Style Bumper FOR THE LEGACY
> RS Style Fiberglass Hood with Vents
> Fiberglass Front fenders *recomend race only*
> Fiberglass Parts in general..*recomend race only*
>
> the way it works is there is a mold cost.. 30 dollars per square
foot.. a RS
> bumper has 8.1 square feet of area.. which = a mold cost of $243.00
>
> Each part will be made at 25% a quarter of the cost of the mold
cost..which
> is $60.75
>
> Well, I don't have a spare RSbumper layen around how bout you? Me
neither
> so.. a new one to make a mold from costs *since the last time I
looked*
> $249.00 from the dealership..
>
> Well, gee we're up to 552.75 for one part woo hoo..now granted for
one part I
> would just have a body shop MAKE the RS bumper Fit my car and be
off..BUT you
> want one too.. So we take a normal RS bumper Make it fit a year
Legacy..make
> all the mounting and shaving ahead of time..make the mold and pop
out, ready
> to bolt on parts you can throw on your car..woo hoo..
>
> So..
> Mold price: 243.00
> part price 60.75
> 5people 60.75
> 60.75
> 60.75
> 60.75
> RSBumper249.00
> -----------------------------------
> Equals = 795.75
> divided 5 ways is: 159.15...gee an RS bumper that fits your
car..for hmm
> under 200 bucks..
>
> Now I am not including shipping..cause I don't know the final
weight until
> it's finished..
>
> On a side note.. my quad headlamp design for my 91 subaru wgn has
come back
> from the blueprint office..so now to find a machine shop..
>
> Now.. Again if there are interested parties.. we can continue this
subject..
> I am always ready..
>
> David Carter



To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com







------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/47cccB/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com