legacycentral bbs

Hello, I am curious about side skirts for are cars. I have never
seen any on US spec cars, but on several euro legacy turbos I have
seen side black side skirts, much like the ones on 97-99 US legacy
GTs. I think Miki's ride, the yellow wagon (there are picts in the
photos section) has them. Does anyone know where to get these? Are
the made for the BC-BF's? Are they later model ones fitted to a BC-
BF? Any info on this would be great.
Thanks
Micum
91 Legacy Turbo Sport EJ20


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/Pv4pGD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

The black bits on the bumpers are part of the front and rear bumpers,
can not be removed. The only bits you can get are the side skirts,
and you should try a wrecker.

Dan

--- In BC-BFLegacyWorks@y..., czo79@h... wrote:
> Hello, I am curious about side skirts for are cars. I have never
> seen any on US spec cars, but on several euro legacy turbos I have
> seen side black side skirts, much like the ones on 97-99 US legacy
> GTs. I think Miki's ride, the yellow wagon (there are picts in the
> photos section) has them. Does anyone know where to get these?
Are
> the made for the BC-BF's? Are they later model ones fitted to a BC-
> BF? Any info on this would be great.
> Thanks
> Micum
> 91 Legacy Turbo Sport EJ20


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/Pv4pGD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Micum,
the Aust spec Liberty has them also. My 1992 RS Liberty (Legacy)Turbo has
the side skirts, held in place with screws and clips, also have matching
mudflaps, rear bumper skirt, held in place with screws, also have mudflaps
to suit. The front bumper skirt is part of the bar, painted black to look
seperate. To obtain these, you would want to try second hand, as new they
are expensive. Try contacting a rally club as i know a lot of Liberty's
that were rallied had these parts removed....... at least here in Australia.
Maybe an add on the MRT classifieds?
cheers, Rod ......in OZ.

----- Original Message -----
From: <czo79@hotmail.com>
To: <BC-BFLegacyWorks@yahoogroups.com>
Sent: Wednesday, October 10, 2001 5:10 AM
Subject: [BC-BFLegacyWorks] BC-BF side skirts


> Hello, I am curious about side skirts for are cars. I have never
> seen any on US spec cars, but on several euro legacy turbos I have
> seen side black side skirts, much like the ones on 97-99 US legacy
> GTs. I think Miki's ride, the yellow wagon (there are picts in the
> photos section) has them. Does anyone know where to get these? Are
> the made for the BC-BF's? Are they later model ones fitted to a BC-
> BF? Any info on this would be great.
> Thanks
> Micum
> 91 Legacy Turbo Sport EJ20
>
>
>
> To unsubscribe from this group, please send an email to:
> BC-BFLegacyWorks-unsubscribe@egroups.com
>
>
>
>
>
>


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/Pv4pGD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

yes, but I have never seen these on a US spec BC-BF, I have only seen
similar skirts on 97-99 GT's, at least in the US. Did they have
these in the US? If so, I should be able to order new ones if I
can't find them in a junkyard.
Micum
91 Legacy Turbo Sport EJ20
--- In BC-BFLegacyWorks@y..., "Daniel Wilson" <daniel.wilson@d...>
wrote:
> The black bits on the bumpers are part of the front and rear
bumpers,
> can not be removed. The only bits you can get are the side skirts,
> and you should try a wrecker.
>
> Dan
>
> --- In BC-BFLegacyWorks@y..., czo79@h... wrote:
> > Hello, I am curious about side skirts for are cars. I have never
> > seen any on US spec cars, but on several euro legacy turbos I
have
> > seen side black side skirts, much like the ones on 97-99 US
legacy
> > GTs. I think Miki's ride, the yellow wagon (there are picts in
the
> > photos section) has them. Does anyone know where to get these?
> Are
> > the made for the BC-BF's? Are they later model ones fitted to a
BC-
> > BF? Any info on this would be great.
> > Thanks
> > Micum
> > 91 Legacy Turbo Sport EJ20


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/Pv4pGD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

Much thanks...I'll give it a shot.
Micum

--- In BC-BFLegacyWorks@y..., "Rod" <melrod@o...> wrote:
> Micum,
> the Aust spec Liberty has them also. My 1992 RS Liberty (Legacy)
Turbo has
> the side skirts, held in place with screws and clips, also have
matching
> mudflaps, rear bumper skirt, held in place with screws, also have
mudflaps
> to suit. The front bumper skirt is part of the bar, painted black
to look
> seperate. To obtain these, you would want to try second hand, as
new they
> are expensive. Try contacting a rally club as i know a lot of
Liberty's
> that were rallied had these parts removed....... at least here in
Australia.
> Maybe an add on the MRT classifieds?
> cheers, Rod ......in OZ.
>
> ----- Original Message -----
> From: <czo79@h...>
> To: <BC-BFLegacyWorks@y...>
> Sent: Wednesday, October 10, 2001 5:10 AM
> Subject: [BC-BFLegacyWorks] BC-BF side skirts
>
>
> > Hello, I am curious about side skirts for are cars. I have never
> > seen any on US spec cars, but on several euro legacy turbos I have
> > seen side black side skirts, much like the ones on 97-99 US legacy
> > GTs. I think Miki's ride, the yellow wagon (there are picts in
the
> > photos section) has them. Does anyone know where to get these?
Are
> > the made for the BC-BF's? Are they later model ones fitted to a
BC-
> > BF? Any info on this would be great.
> > Thanks
> > Micum
> > 91 Legacy Turbo Sport EJ20
> >
> >
> >
> > To unsubscribe from this group, please send an email to:
> > BC-BFLegacyWorks-unsubscribe@egroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >


------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/Pv4pGD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

I've seen them once. I endangered my pants when I saw them.

-----Original Message-----
From: czo79@hotmail.com [mailto:czo79@hotmail.com]
Sent: Tuesday, October 09, 2001 6:10 PM
To: BC-BFLegacyWorks@yahoogroups.com
Subject: [BC-BFLegacyWorks] Re: BC-BF side skirts


yes, but I have never seen these on a US spec BC-BF, I have only seen
similar skirts on 97-99 GT's, at least in the US. Did they have
these in the US? If so, I should be able to order new ones if I
can't find them in a junkyard.
Micum
91 Legacy Turbo Sport EJ20
--- In BC-BFLegacyWorks@y..., "Daniel Wilson" <daniel.wilson@d...>
wrote:
> The black bits on the bumpers are part of the front and rear
bumpers,
> can not be removed. The only bits you can get are the side skirts,
> and you should try a wrecker.
>
> Dan
>
> --- In BC-BFLegacyWorks@y..., czo79@h... wrote:
> > Hello, I am curious about side skirts for are cars. I have never
> > seen any on US spec cars, but on several euro legacy turbos I
have
> > seen side black side skirts, much like the ones on 97-99 US
legacy
> > GTs. I think Miki's ride, the yellow wagon (there are picts in
the
> > photos section) has them. Does anyone know where to get these?
> Are
> > the made for the BC-BF's? Are they later model ones fitted to a
BC-
> > BF? Any info on this would be great.
> > Thanks
> > Micum
> > 91 Legacy Turbo Sport EJ20



To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com








------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/Pv4pGD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com

--- In BC-BFLegacyWorks@y..., "Rod" <melrod@o...> wrote:
> Micum,
> the Aust spec Liberty has them also. My 1992 RS Liberty (Legacy)
Turbo has
> the side skirts, held in place with screws and clips, also have
matching
> mudflaps, rear bumper skirt, held in place with screws, also have
mudflaps
> to suit. The front bumper skirt is part of the bar, painted black
to look
> seperate. To obtain these, you would want to try second hand, as
new they
> are expensive. Try contacting a rally club as i know a lot of
Liberty's
> that were rallied had these parts removed....... at least here in
Australia.
> Maybe an add on the MRT classifieds?
> cheers, Rod ......in OZ.
>

Hey Rod where do you live in OZ??

E-mail me pls. wouldn't mind getting in touch.
I'm also in Aus. I live in Brisbane.



------------------------ ---------------------~-->
FREE COLLEGE MONEY
CLICK HERE to search
600,000 scholarships!
http://us.click.yahoo.com/Pv4pGD/4m7CAA ... /XoTolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, please send an email to:
BC-BFLegacyWorks-unsubscribe@egroups.com