I'm looking into to getting some DOHC heads off of a 1997 legacy GT. I am wondering what else will need to be done to get these heads to work with the EJ22T block, will stock internals be ok or should i rebuild it. any suggestions are welcome.
thanks in advance.
DOHC info. needed
Moderators: Helpinators, Moderators
-
93forestpearl
- Fifth Gear
- Posts: 3043
- Joined: Tue Jan 25, 2005 9:14 pm
- Location: Twin Cities, MN
The DOHC thread doesn't cover adding the oil/coolant passages to the USDM heads yet.
Essentially this is what you will need to do:
Essentially this is what you will need to do:
'93 Winestone SS Auto, '91 Pearl White SS.
'93 Pure White SS EJ20G slanty intercooled, SIDESWIPED! In stasis.
'94 FWD and '95 AWD Laguna Blue SVXs.
2017 Pure Red BRZ Limited w/Performance pack
'93 Pure White SS EJ20G slanty intercooled, SIDESWIPED! In stasis.
'94 FWD and '95 AWD Laguna Blue SVXs.
2017 Pure Red BRZ Limited w/Performance pack
-
dscoobydoo
- Fifth Gear
- Posts: 2275
- Joined: Mon Mar 08, 2004 2:30 am
- Location: Auburn, WA
- Contact:
-
beatersubi
- Fifth Gear
- Posts: 2385
- Joined: Tue Mar 13, 2007 12:56 am
- Location: 10-9-oh(!), wa
Or you run it to the oil pan if you're not comfortable drilling into your cyl. head.
93 legacy wagon L, 22T swapped (TW imitator) now with five forward speeds. (Gone, but never forgotten)
johndrivesabox wrote: Rally, my kyboard is brok, his has nohing o do wih h liquor.
Originalcyn wrote:Apparently everyone hates Gabe.