Heads, valves, pistons, rods, crankshaft, etc...
Moderators: Helpinators , Moderators
BSOD2600
Fourth Gear
Posts: 1636 Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA
Post
by BSOD2600 » Sat Apr 04, 2009 11:31 pm
Went to the local subaru junkyard to pick myself up a Autecs MAF and 440cc injectors (which I was told they had). Upon arriving, the guy didn't know exactly what it was from but said, "a late '90 model 2.5L'.
Fuel rail:
Injector:
I can't find anything about that fuel rail on google, except for a random forum post regarding a "Subaru Legacy BH B4". That injector sort of looks grey, but I'd call it almost white.
Any thoughts on what size injector this thing is? I'm thinking it's not going to work out for me...
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
Skruyd
Second Gear
Posts: 263 Joined: Mon Sep 29, 2008 2:36 am
Location: Clarksville, tn
Contact:
Post
by Skruyd » Sun Apr 05, 2009 7:28 am
Any markings what so ever on the injectors? A lot of company's make side-feed injectors.
91 Subaru Legacy SS (Driving) 3"TBE, Vrg FCD, 440cc, HKS Safc, Vf10, ebay FMIC, Jecs
92 Toyota Corolla (fixing then selling)
06 ZZR600
SILINC3R
quasi-mod-o
Posts: 2763 Joined: Wed May 30, 2007 6:11 am
Location: Charlotte, NC
Post
by SILINC3R » Sun Apr 05, 2009 7:45 am
a late '90 model 2.5L'.
unless it is JDM which it is not, there is no such thing.
am i not correct?
Tony
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
92ss satinsvoice wrote: LOL! that block was like F*** THIS! IM OUT!
mike-tracy wrote: Word. I'd love to get my hands on one of those trannies, but I just can't stomach the cost
BSOD2600
Fourth Gear
Posts: 1636 Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA
Post
by BSOD2600 » Sun Apr 05, 2009 8:33 am
The front of the injector has "Made in Japan A2".
The top has "6620" and "5R77". The connector side has "A46-00"
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
Skruyd
Second Gear
Posts: 263 Joined: Mon Sep 29, 2008 2:36 am
Location: Clarksville, tn
Contact:
Post
by Skruyd » Sun Apr 05, 2009 8:44 am
similar, different part number, but may not be the same flow rating
*EDIT*
The picture is a 5R76 JECS Side-feed fuel injector. I don't suppose you can give us a picture of the whole fuel rail? Might just be a stupid question, but the A46-00 is a part number for Nissan fuel injectors, or it can just be the number for the type of plug is used for the injector.
91 Subaru Legacy SS (Driving) 3"TBE, Vrg FCD, 440cc, HKS Safc, Vf10, ebay FMIC, Jecs
92 Toyota Corolla (fixing then selling)
06 ZZR600
BSOD2600
Fourth Gear
Posts: 1636 Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA
Post
by BSOD2600 » Sun Apr 05, 2009 9:31 am
Yea, I saw a lot of references to the Nissan injectors with that A46 reference.. but being that I went to a Subaru only junkyard,
Aarons Auto , I kind of doubt it's that.
Rail1:
17522 AA410
A46-701 R71
6625
Rail 2:
17523 AA360
A46-702 R71
6625
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
BSOD2600
Fourth Gear
Posts: 1636 Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA
Post
by BSOD2600 » Sun Apr 05, 2009 9:45 am
this link from some Swedish site, had those injector rails -- and it's from a 1999 model Subaru
. I've got some Swedish friends online who tell me Spridarrör is basically "injector pipe".
This thread on nasioc states those rails are from "96-98 legacy with a dohc ej25"
this site states they're Subaru Impreza 1995-2000.
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
Legacy777
Site Admin
Posts: 27932 Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Post
by Legacy777 » Sun Apr 05, 2009 5:14 pm
I can't find those part numbers in subaru's parts catalog, so they're probably nissan.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
beatersubi
Fifth Gear
Posts: 2385 Joined: Tue Mar 13, 2007 12:56 am
Location: 10-9-oh(!), wa
Post
by beatersubi » Sun Apr 05, 2009 5:18 pm
Nissan rails w/ two injectors?
93 legacy wagon L, 22T swapped (TW imitator) now with five forward speeds. (Gone, but never forgotten)
johndrivesabox wrote: Rally, my kyboard is brok, his has nohing o do wih h liquor.
Originalcyn wrote: Apparently everyone hates Gabe.
Legacy777
Site Admin
Posts: 27932 Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Post
by Legacy777 » Sun Apr 05, 2009 7:09 pm
Just thought of it, they could be overseas subaru rails & injectors.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Skruyd
Second Gear
Posts: 263 Joined: Mon Sep 29, 2008 2:36 am
Location: Clarksville, tn
Contact:
Post
by Skruyd » Mon Apr 06, 2009 8:57 pm
I guess the best way to find out what they flow at is just to get them tested. At least they can tell you if they even work correctly.
91 Subaru Legacy SS (Driving) 3"TBE, Vrg FCD, 440cc, HKS Safc, Vf10, ebay FMIC, Jecs
92 Toyota Corolla (fixing then selling)
06 ZZR600
BSOD2600
Fourth Gear
Posts: 1636 Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA
Post
by BSOD2600 » Tue Apr 07, 2009 4:22 am
Since no one can find out what the heck they are, thinking about just taking them back and getting 440cc's online. Don't really want to waste money on mystery injectors tested.
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
555BCTurbo
Knowledgeable
Posts: 3335 Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon
Post
by 555BCTurbo » Tue Apr 07, 2009 4:36 am
Chris-
Those are EJ22E injectors out of a 90-91 car...probably automatic...
They flow at a whopping 270cc
Nick
1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
Legacy777
Site Admin
Posts: 27932 Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Post
by Legacy777 » Tue Apr 07, 2009 8:18 pm
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
555BCTurbo
Knowledgeable
Posts: 3335 Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon
Post
by 555BCTurbo » Tue Apr 07, 2009 8:32 pm
Pretty close...
All I see is a different pintle seat
Nick
1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust