Search found 3024 matches
- Tue Apr 29, 2014 1:56 am
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
Re: 91 EJ22E Brat Swap Code 61
haha yea.... my old fuel tank rotted out and I replaced it with an aluminum fuel cell, but one of the screws for the fuel level sender leaks a tiny bit, and if the tank gets pressurized it leaks a lot. so I took the seal out of the gas cap until I can drop the tank to repair it properly. It doesn't ...
- Mon Apr 28, 2014 8:44 pm
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
- Sun Apr 27, 2014 2:44 am
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
Re: 91 EJ22E Brat Swap Code 61
Wrong ECU for the intake manifold. The manifold must have been off a 92-94 car. It's got the rotary valve IACV and the red injectors.
Snagged a junkyard 93 ECU and a JECS maf, and its running like a champ now.
Snagged a junkyard 93 ECU and a JECS maf, and its running like a champ now.
- Sun Apr 27, 2014 2:24 am
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
Re: 91 EJ22E Brat Swap Code 61
oh my god.
It idles.
It gets 35mpg.
No more codes.
I really wish I'd dug into this a year ago. I would have saved so much money in gas...
It idles.
It gets 35mpg.
No more codes.
I really wish I'd dug into this a year ago. I would have saved so much money in gas...
- Tue Apr 22, 2014 2:29 pm
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
Re: 91 EJ22E Brat Swap Code 61
Actually now I'm thinking that my whole intake manifold is more likely off a 92. So rather than finding a 91 IAC, I'm probably better off trying a 92 ECU.... although then I'll also need a jecs maf... hmmm...
- Tue Apr 22, 2014 3:03 am
- Forum: Engine
- Topic: EJ22T hybrid build
- Replies: 22
- Views: 4582
Re: EJ22T hybrid build
If you're interested I have a set of heads from my ej22t/25D hybrid block that lost a rod They were built by delta cams. +1mm oversized stainless valves, reground cams for turbo, oil and water fittings for factory location turbo paid around 2500 for them asking 1000 + shipping. There's no signs of a...
- Tue Apr 22, 2014 2:16 am
- Forum: Engine
- Topic: Ultimate cheap crank pulley holder!
- Replies: 6
- Views: 827
Re: Ultimate cheap crank pulley holder!
You sure like making threads
- Tue Apr 22, 2014 1:55 am
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
- Tue Apr 22, 2014 1:41 am
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
Re: 91 EJ22E Brat Swap Code 61
I haven't had the code 61 come back again and I think I've figured out my idle problem
Looks like the 91 manual trans car is supposed to come with a different idle control valve than what I have, a 2 pin version.
Looks like the 91 manual trans car is supposed to come with a different idle control valve than what I have, a 2 pin version.
- Tue Apr 08, 2014 4:24 am
- Forum: Engine
- Topic: Oil Pressure gauge reading 0psi at idle..
- Replies: 26
- Views: 5388
Re: Oil Pressure gauge reading 0psi at idle..
they'll read kinda funky if the ground at the gauge has a potential difference to the ground at the sender.
- Mon Mar 24, 2014 12:53 am
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
Re: 91 EJ22E Brat Swap Code 61
There is a code 35 stored from when I was trying to get the swap running, but there isn't a current one when I put it in d-check mode. I have a purge solenoid hooked into the wiring but its not actually hooked up to anything, but that shouldn't matter, AFAIK it only goes off the resistance of the so...
- Sat Mar 22, 2014 6:27 pm
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
Re: 91 EJ22E Brat Swap Code 61
Well I've always had idle problems, but I've just ignored them. Recently my fuel economy took a huge dump do and started getting hesitation on acceleration. The problem is I've got about twenty codes stored from when I was trying to get the swap running initially, and I can't clear them so I can't f...
- Sun Mar 16, 2014 8:42 pm
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
Re: 91 EJ22E Brat Swap Code 61
Anyone ever had the idle circuit in the ECU fail?
I can control the IAC manually by grounding the pins after disconnecting them from the ECU, but the ECU won't control it itself. It just keeps it full closed.
I can control the IAC manually by grounding the pins after disconnecting them from the ECU, but the ECU won't control it itself. It just keeps it full closed.
- Sat Mar 15, 2014 12:01 am
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
Re: 91 EJ22E Brat Swap Code 61
I can't clear the codes. I tried disconnecting the battery for three days, pulling the fuse and removing the ecu completely from the car. nada. the proper way of clearing the codes by connecting both connectors doesn't seem to work, but I think you need to take it for a test drive and get the all cl...
- Fri Mar 14, 2014 2:33 pm
- Forum: Engine
- Topic: 91 EJ22E Brat Swap Code 61
- Replies: 20
- Views: 3258
91 EJ22E Brat Swap Code 61
This is really weird. I had a major drop in fuel economy so I was doing some diagnostics, I put the Brat into D-check mode, did a test drive and it comes back with codes 24,33,51 and 61 I fixed 33 and 51, now I've got 24 and 61 I'm going to try and fix the idle air valve this weekend... but what the...
- Tue Jan 22, 2013 2:02 am
- Forum: Intake
- Topic: EJ22E swapped Brat failing emissions
- Replies: 15
- Views: 4502
Re: EJ22E swapped Brat failing emissions
haha soooo....
HC dropped from 665 to 47 (max allowed 408)
CO dropped from 6.83 to 0 (????, max allowed 4.60)
Car has officially passed emissions.
Fun fact: Even if this engine was still in a 91 Legacy, it would have breezed through the test.
HC dropped from 665 to 47 (max allowed 408)
CO dropped from 6.83 to 0 (????, max allowed 4.60)
Car has officially passed emissions.
Fun fact: Even if this engine was still in a 91 Legacy, it would have breezed through the test.
- Sat Jan 19, 2013 9:01 am
- Forum: Intake
- Topic: EJ22E swapped Brat failing emissions
- Replies: 15
- Views: 4502
Re: EJ22E swapped Brat failing emissions
Yowza... got the hitachi maf on tonight and I think my gas mileage is about go through the roof. This thing has a ridiculous amount of power now, it's hard to keep my foot off the throttle
Taking it back for a retest monday, I'll update with the results!
Taking it back for a retest monday, I'll update with the results!
- Sat Jan 12, 2013 9:26 am
- Forum: Intake
- Topic: EJ22E swapped Brat failing emissions
- Replies: 15
- Views: 4502
Re: EJ22E swapped Brat failing emissions
Dang his JECS ecu was fried, didn't even prime the fuel pump. I did confirm that my ECU is a hitachi tho, so should any hitachi maf work, even from a turbo? EDIT: Just looked through the parts catalog, yea looks like I need a metal hitachi maf from a turbo. I'm pretty sure I have one at my parents p...
- Sat Jan 12, 2013 3:39 am
- Forum: Intake
- Topic: EJ22E swapped Brat failing emissions
- Replies: 15
- Views: 4502
Re: EJ22E swapped Brat failing emissions
A friend has a spare auto ECU, gonna try that out tonight. Fingers crossed.
- Fri Jan 11, 2013 9:01 pm
- Forum: Intake
- Topic: EJ22E swapped Brat failing emissions
- Replies: 15
- Views: 4502
Re: EJ22E swapped Brat failing emissions
Oh FFS, I have the wrong damn MAF I just realised. At least I think so.
The ECU is from a 91 NA 5MT, and I have the black JECS maf.
I need the metal MAF, don't I?
The ECU is from a 91 NA 5MT, and I have the black JECS maf.
I need the metal MAF, don't I?
- Fri Jan 11, 2013 8:52 pm
- Forum: Intake
- Topic: EJ22E swapped Brat failing emissions
- Replies: 15
- Views: 4502
Re: EJ22E swapped Brat failing emissions
I had to piece it together, the computer did come out of another legacy but it came out of the same year and transmission. The car failed the Idle test, I'll see about hooking up the VSS but I don't see how that can come into play when the car isn't even moving. Coolant temp sensor is definitely som...
- Fri Jan 11, 2013 5:02 am
- Forum: Intake
- Topic: EJ22E swapped Brat failing emissions
- Replies: 15
- Views: 4502
EJ22E swapped Brat failing emissions
Long time no talk, fellas. I moved for school a couple weeks ago, and the city I moved to requires emissions testing. I installed a couple cats and thought I'd be laughing, with my 91 Legacy motor in my 83 Brat. Nope. They only did the idle test, but HC was 665 and CO was 6.83%, both about 50% above...
- Thu Feb 09, 2012 11:51 pm
- Forum: Parts Shed
- Topic: WTB: Throttle Body with linkage on passenger side
- Replies: 2
- Views: 643
Re: WTB: Throttle Body with linkage on passenger side
Modified my stock throttle to work, disregard!
- Tue Jan 31, 2012 6:47 pm
- Forum: Parts Shed
- Topic: WTB: 91 legacy non-turbo manual trans ECU
- Replies: 3
- Views: 527
Re: WTB: 91 legacy non-turbo manual trans ECU
Looks like I got one, thanks guys
- Tue Jan 31, 2012 6:43 pm
- Forum: Parts Shed
- Topic: WTB: Throttle Body with linkage on passenger side
- Replies: 2
- Views: 643
WTB: Throttle Body with linkage on passenger side
Not sure what cars they came on, V4 STI for sure.