legacycentral bbs

Selling my 2 legacy's Tan legacy is currently on non op. has some interior trim and the headliner out right now as well as some exterior a pillar trim off, never got around to finishing it. Ej20 engine 2.5rs trans and diff Grounp n mounts Sti seats front and back Nearly new general gmax tires Maroon...

Hey guy can someone help me with a part number for these three grommets, couldn't find them in any diagram, all three on the opposite side quarter panel are missing and I'm trying to get the trim pieces put back on, any help would be appreciated thanks! http://i52.photobucket.com/albums/g7/melord/IM...

If anyone has the weather striping where the red is in the picture below and if its in good condition, i am in need of some as mine was rotten and missing.

Thanks, Brian

I am in the process of repainting the trim on the legacy, and the rubber around the rear window trim is shot, does anyone know if it is still available? or has someone here used something to replace it?

Thanks, Brian

Coverted my A/C A while back to R-134a, and at the time I did not know what I was doing, needless to say I just used ester oil and now my compressor (calsonic) is slowly getting worse and worse! My question is who makes a reputable replacement compressor, read that remanufactured is junk! is a 4 sea...

Having a problem with the battery light! It wont go off, at first it would flicker dim on or off more or less as I drove but now its just always on! Any thoughts? what can I check to fix this? Battery voltage is within range, I installed a new alternator thinking that was the problem but it didn't c...

I am going all original stock ej22t and was wondering if the old style design will be fine when shutting off after hard driving. will the oil in the turbo lines boil? is it worth putting in a pump to circulate oil or coolant?? new to all this and am just worried, any info would be much appreciated. ...

Does anyone know how hot the exhaust manifold can get on an EJ22t? want to coat it but not sure what to use since I don't know what the max temp is.

Brian

Oh ya I forgot valve cover gaskets lol! I want to go OEM on pretty much everything I can. Do you know of any good priced online retailers for OEM parts? Does someone sell a kit with a water pump and all the idler pulleys? Is it necessary to replace the oil pump? Sorry for all the questions I just wa...

So I have a few questions, I am in the process of doing an engine swap from a 22 to a 22t and while the engine is out I would like to replace anything that should be replaced before the engine is in the car, I don't want to deal with any leaks. the list so far is Seals/Gaskets: Camshaft Valve cover ...

Does anyone know what the part number for he window pads are? I would like to look into replacing them since my windows are scratched pretty bad.

Thanks

the 2nd gear syncro went on the 2.5rs trans that's in the legacy! have few questions so i can decide my next step, your input is appreciated! First question is would it be worth getting it rebuilt? or would it be cheaper to just look for another trans? anyone know about how much it would cost to rep...

Does anyone know if there is a way to adjust the windows??? When the window is rolled down and I shut the door it sound horrible, like the window is really loose! Is this normal? Also I am getting scratches on the windows as well, from what looks to be some kind of guide maybe? is there a way to fix...

nice!

No luck yet guess I'll try Nasioc just don't usually like posting on there.

Thanks josh lol

Anyone know of a good place i can take my trans to in socal?? Second gear synchro is bad!
I want to find a place to take it before i pull it!
if anyone one knows of a quality place please let me know

Thanks, Brian

Good article! I have to admit I am guilty of judging a lot it's just hard some times, but I try to be understanding " To each his own" I try and remember that!

I have like 2 of those and they aren't worth a crap. I need some kind of diagrams I'm so lost, where would I even find these hoses, parts for these engines are getting harder and harder to find!

haha yes he does drive like an old man, but there are times hen he really gets on it! I just want to know how bad it really is to run a lower octane gas? or is it ok?

I did the wire trick in the LH side and no more noise but no luck with the RH side, I even removed and tried clamping it but no luck! what are the procedures for doing the epoxy fix?? if this doesn't work I guess I'm going to have to buy one, it bugs the shit out of me lol Also is any one getting sc...

I have been getting parts together for my EJ22t swap, but I am having trouble figuring out all of what I need. I am in need of guidance and if possible some form of manual that will help me figure out what all I need. these engines did not come with any type of inter cooler correct? I don't have the...

Thanks Kimo

Okay so my Grandfather has an 07 Forester XT & a 96 SVX both of these cars require 91 octane or better, but he uses 87 octane regular, and claims that neither of them knock and quotes he can't tell the difference! Well I think other wise, and that he should follow what the factory recommends, es...

Finally Snowed!!!! Some AWD fun :-D http://i52.photobucket.com/albums/g7/melord/390225_324378567580738_100000257912469_1245907_622066889_n.jpg http://i52.photobucket.com/albums/g7/melord/385105_324378757580719_100000257912469_1245911_282384116_n.jpg http://i52.photobucket.com/albums/g7/melord/383239...

Isn't the window brace part of the door?? I wasn't aware you could remove it