legacycentral bbs

Started her up after school, notched she was bogging down a bit, soon after I was turning onto the road, noticed some knocking at half throttle, next thing I know the engine stalled and the tires locked up and I came to a skidding stop. Once I got towed home by a friend, I took off the timing belt c...

ride_child wrote:i have a full set!

Do you mind pm’ing me? I’d love to see them and setup a price!


Sent from my iPhone using Tapatalk

Are the struts sold yet, and also do they stiffen up the suspension quite a bit? I’ve had a problem with rubbing when I have lots of cargo or people in the back.


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/20190304/0233207ee15ffb644ab543a8be82c553.jpg Not sure how well you can see them, but behind the wheel are some mud flaps/trim pieces. When I was messing around I somehow cracked one and I was wondering if anybody had a set of them. Might just end up putting some ra...

scoobydoo94turbo wrote:

JimBos Legacy wrote:Do those 94’s come with LSD’s in the rear?


Sent from my iPhone using Tapatalk

Honestly ive owned over 7 of these cars and never seen LSD in any of the 3.90 rear ends

Damn, I was hoping haha


Sent from my iPhone using Tapatalk

Do those 94’s come with LSD’s in the rear?


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/20190226/166d3cd2b1c177036ff010e5f864153e.jpg Got some bronze 16x7 A-Tech Final Speed Erasers. Running 215/55 tires on them. Rubs a little bit on big dips but not during everyday driving. Love how the wheels match the 2-tone so well on the car! Sent from my iPhone u...

https://farm6.staticflickr.com/5796/30358485183_8009713815.jpg GD KYB's w/ STi pink springs. Slightly lower than stock. Too much spring and/or not enough damper. Handles well, rides like garbage truck. 205/50/16 Kuhmos on RS 16" six spokes. What year WRX are those KYB’s made for, been looking ...

waldo320 wrote:Photobuckets website seems to be down. If your interested in something I can email you the pics.

I was wanting to see those oil pressure and temp gauges


Sent from my iPhone using Tapatalk

waldo320 wrote:The oil pressure gauge and coolant temp garage are both Megan Racing gauges. Great deal on both!

The photo bucket link doesn’t work anymore, if you could reupload that


Sent from my iPhone using Tapatalk

mike-tracy wrote:The LHD GC8 rack swaps onto BC's (you reuse the BC's ball joint arms), so it seems likely the RHD ones would work.

Might just go for it and see if it works


Sent from my iPhone using Tapatalk

Legacy777 wrote:I'm sure it can be made to work, but I'm not sure if it's a direct bolt in or not.

Damn, I was hoping someone had done it before. If you ever come across a rhd rack let me know.


Sent from my iPhone using Tapatalk

Any body know if this is swappable? I have a power steering leak and I’m having to drop the steering rack anyways to fix the seals, so I though I might as well upgrade it if I can. I was looking into the 13:1 ratio steering rack the the GC8 since I can’t find any steering racks for my car. Appreciat...

What does the WRX BOV look like?


Sent from my iPhone using Tapatalk

Ahh. all you need to do to use phase 2 sidefeeds is ej25d (all years, 96-99) rails. I know you were talking about retrofitting top feeds, but Rob's conversion kit does the same thing as using ej25d rails on an ej20g manifold. Gotcha, so it’d probably just be easiest to run robs adapters. I can’t se...

mike-tracy wrote:What intake manifold do you currently have, Jimbo?

I don’t have the exact part number, but it’s the stock manifold on a V1 Ej20G


Sent from my iPhone using Tapatalk

If I were to run 550cc Top feed injectors, instead of running the adapters for the yellow top side feed injectors, would the 550 tune still work? I found some 550cc top feed injectors online awhile searching around. The tune was developed with a specific set of hardware in mind. Deviating from that...

Legacy777 wrote:That kit is for the Newer Subaru manifolds. I don't know if they would be a direct fitment on our cars without some work.

I’ll take a look at the injectors and see if it looks like it’ll bolt up


Sent from my iPhone using Tapatalk

Legacy777 wrote:Top feeds will not work on the first gen Legacy fuel rails.

What adapters are you thinking of using?

One of the kits I found is by a company called Deatschwerks, haven’t looked around the fourms to see if any one else has used them.


Sent from my iPhone using Tapatalk

I don't think the injector latency (dead) times are going to be the same between the side & top feeds. If you can find that information about both types of injectors you could clarify that. Are you planning on using a different intake manifold? If not I think fitting the top feeds on there woul...

If I were to run 550cc Top feed injectors, instead of running the adapters for the yellow top side feed injectors, would the 550 tune still work? I found some 550cc top feed injectors online awhile searching around


Sent from my iPhone using Tapatalk

Are the struts and springs direct bolt ons, or would I have to do some modification to make it work


Sent from my iPhone using Tapatalk

I had the same problem with some plumbing hose that I used for my 90 degree elbow. I just bought a 90 degree silicon hose that’s made for turbos online line for like $5. You have to shave it really close to make it fit perfect. And sorry for the Snapchat filters these are the only pictures I have :/...

mike-tracy wrote:https://www.youtube.com/watch?v=ls8C9CWhnvA

Loved how they showed the GT wagon. I think the top trim package automatics came with the height control. Mine doesn’t have it but has a place holder for it.


Sent from my iPhone using Tapatalk

I’d recommend trying to find the part number for if it. You can probably find a parts list somewhere online, if I find it I’ll post the link here


Sent from my iPhone using Tapatalk