legacycentral bbs

my 17x7.5 +48 grids did

he's a sucker for pizza

this is my co-pilot "turbo" he is a chow/rott mix and about 5yrs old now

they spin the sleeves when the motors get severely overheated, i've seen it happen on a couple 2.2t's. the only way to fix it is bore out the sleeve and have new sleeves pressed in

kimokalihi wrote:Jake you got a spare engine you don't need? lol

not an assembled ready to go motor, but i'm sure i have enough pieces to make something happen

broke a rear axle, replaced broken axle and noticed my diff carrier had a fresh 5 inch crack in it so i had to remove the diff carrier and weld it up too

get another stock pulley and a new crank sprocket, when the pulley wobbles it tends to chew up the crank sprocket enough to where the new pulley wont sit flush on it. I dont think you're going to get the key off of the crankshaft without yanking the crank sprocket anyways. did it hollow out the keyw...

1990 - Rio Red - 946

exchanged waves with a pearl white 91 SS yesterday in spanaway on Pacific Ave and about 160th around 5:30pm

Bump! need the map sensor STAT!

Two more questions, then: how did you get the trim off without breaking it (like I did the trim around the rear window)? And what did you use for adhesive? I plan on doing some metal bars across the back Chevy Nomad-style, but I still want to make sure it stays up there. luck is what got the trim o...

looking for the map sensor/ pressure exchange solenoid that bolts to the passenger side strut tower. lmk what you got

How hard was it to do the headliner? I was planning to do the same thing in blue. Did you just go over the vinyl, or rip it off first? the headliner was actually pretty easy. The hardest part was taking the car apart to get the headliner out, and that's not difficult either lol. i went over the vin...

wrapped my roof in gloss black vinyl and also wrapped the headliner in black microsuede

if it turns out there is no rallyxs or autoxs i think i might show up

if you're going to use the STi hubs you need to use the STi axles and consequently the r180 rear diff. i also think that without changing the tranny you wont be able to use the front axles unless they're are female style axles where they connect to the tranny.

beatersubi wrote:Saw a hawt lifted black '91 wagon on my way home from work today in Tacoma. Had a turbo hood, though not sure if it was actually a TW. I left a DI spotted card as that's all I had on me at the time.
You here?

that's Matt (superrallysoob)

i usually hit up the weekly south sound meet every week. it's a little far for you up north guys to drive but if you're feeling up to it you're more than welcome to swing by! link i've also been thinking about organizing another bbq now that it seems the weather has finally cleared up a bit, keep an...

there are pearl white non turbos out there, just not very many of them

awe shucks, you guys are going to make me blush

stay tuned for some interior pics, i have a few mods i want to do first though

beatersubi wrote: How about 'vanity member extraordinaire'?

I like it! sounds exponentially fancier.

Kelly wrote:
Jake, no big motor plans for this one, but the plans do include the use of one of these.

legacy truck?

i like the yellow with gunmetal rims the most, then the yellow and black on black is a close 2nd.

what are you plans for this one?

how many pictures do i need to post before my title gets changed to picture whore? :lol: http://i66.photobucket.com/albums/h280/turbolegacyjake/new%20wheels/IMG_1475.jpg http://i66.photobucket.com/albums/h280/turbolegacyjake/new%20wheels/IMG_1376_7_8.jpg http://i66.photobucket.com/albums/h280/turbol...

Nope, still have the BBS's. using 2 sets of wheels and the other set is for autox'ing lol

is that a RSLC sticker i see on the window ?? :D very nice lip mate yup, its my home away from legacycentral :lol: got some new rims a couple weeks ago....... again haha :D http://farm4.static.flickr.com/3312/4591372134_fba31d5c27_b.jpg http://farm5.static.flickr.com/4024/4590752069_a6232d6301_b.jp...