Stock intake with td04?

Snorkus, filters, throttle bodies and intake manifolds.

Moderators: Helpinators, Moderators

Post Reply
YetiSmasher
First Gear
Posts: 112
Joined: Wed Nov 12, 2014 6:55 am
Location: Portland, OR

Stock intake with td04?

Post by YetiSmasher » Tue Jan 05, 2016 10:49 pm

Can I use the factory intake set up with a td04? Thinking about doing the swap soon.

mike-tracy
Moderator
Moderator
Posts: 4946
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Stock intake with td04?

Post by mike-tracy » Tue Jan 05, 2016 11:49 pm

I've seen people buy silicone elbows in the appropriate sizes to make it work. Most use the opportunity to upgrade to a tmic, however.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote:
Mon Jan 14, 2002 10:23 am
Wait....I'm confused now.

robertpaige
Fourth Gear
Posts: 1229
Joined: Tue Jul 31, 2012 10:32 pm
Location: Portland, Oregon.

Re: Stock intake with td04?

Post by robertpaige » Wed Jan 06, 2016 1:17 am

Yes, you will need to buy a 90 degree silicone elbow that 2.25" in size, then cut a piece of pipe so that you can clamp the new inlet to the turbo elbow.
Had more Legacy's than I know what to with...
Current: 92' SS

YetiSmasher
First Gear
Posts: 112
Joined: Wed Nov 12, 2014 6:55 am
Location: Portland, OR

Re: Stock intake with td04?

Post by YetiSmasher » Wed Jan 13, 2016 10:12 pm

I currently have an 06 tmic plummet up to my vf11. I understand I have yo reroute the my plumming to the outlet as well. Shouldn't be that hard. As for as the outlet, I just need the 90' elbow and a piece of pipe yo connect to the stock air box?

Post Reply