front mount intercooler install and parts........$600

Front, Top, Air, Water.

Moderators: Helpinators, Moderators

Post Reply
SSmadness
In Neutral
Posts: 26
Joined: Tue Feb 03, 2009 1:41 am
Location: vancouver,wa

front mount intercooler install and parts........$600

Post by SSmadness »

Hey guys,I wanted to pass along this great deal to you guys,if you want a fmic with piping and ic,installed! custom piping,couplers,intercooler all included in the price.he's my neihbor and just got done with mine....pics to come later today. did I metion the price? 600 bones.
93 SS Winestone- PE 1820,rotated.UEL headers,catless uppipe, 3" bellmouth DP,custom intake,17'' Roto Torques,JIC coilovers

kimokalihi
Fifth Gear
Posts: 8360
Joined: Mon Nov 06, 2006 3:41 am
Location: Tenino, WA

Post by kimokalihi »

Installed you say? I want to see pictures!
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson

stef1825
First Gear
Posts: 97
Joined: Fri Sep 22, 2006 7:21 pm
Location: Hull, Qc, Canada

Post by stef1825 »

Image
... and more info :)

asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

stef1825 wrote:Image
... and more info :)
+1
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]

SSmadness
In Neutral
Posts: 26
Joined: Tue Feb 03, 2009 1:41 am
Location: vancouver,wa

Post by SSmadness »

Image

Image


Image


Image


Image


Image


Image


Image
93 SS Winestone- PE 1820,rotated.UEL headers,catless uppipe, 3" bellmouth DP,custom intake,17'' Roto Torques,JIC coilovers

beatersubi
Fifth Gear
Posts: 2385
Joined: Tue Mar 13, 2007 12:56 am
Location: 10-9-oh(!), wa

Post by beatersubi »

Trust those clamps on the pressurized hose?
93 legacy wagon L, 22T swapped (TW imitator) now with five forward speeds. (Gone, but never forgotten)
johndrivesabox wrote: Rally, my kyboard is brok, his has nohing o do wih h liquor.
Originalcyn wrote:Apparently everyone hates Gabe.

kimokalihi
Fifth Gear
Posts: 8360
Joined: Mon Nov 06, 2006 3:41 am
Location: Tenino, WA

Post by kimokalihi »

What's with the dryer hose?
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson

BXSS
Fourth Gear
Posts: 1301
Joined: Wed Jan 10, 2007 4:23 pm
Location: Bx, NY

Post by BXSS »

Looks like a universal e-bay fmic kit cleanly installed on a car.
I like that there are not many connectors in the systen but I do not like the chopped up bumper beam.

I think the hose will feed the airbox which is pretty cool...
94 Legacy SS
96 Impreza OBS
99 Impreza OBS-T
04 Sienna XLE Limited AWD

SSmadness
In Neutral
Posts: 26
Joined: Tue Feb 03, 2009 1:41 am
Location: vancouver,wa

Post by SSmadness »

Actually its not a kit at all.it was all fabbed by my neihbor and is now running an mbc and runs sooooo much better and half bar of real boost!!
93 SS Winestone- PE 1820,rotated.UEL headers,catless uppipe, 3" bellmouth DP,custom intake,17'' Roto Torques,JIC coilovers

mlitz123
First Gear
Posts: 55
Joined: Mon Apr 27, 2009 5:13 am

Post by mlitz123 »

do you think he would make more and ship them? because ihave a friend that might one.

SSmadness
In Neutral
Posts: 26
Joined: Tue Feb 03, 2009 1:41 am
Location: vancouver,wa

Post by SSmadness »

Big fmic=cuttin the bumper beam.
93 SS Winestone- PE 1820,rotated.UEL headers,catless uppipe, 3" bellmouth DP,custom intake,17'' Roto Torques,JIC coilovers

SSmadness
In Neutral
Posts: 26
Joined: Tue Feb 03, 2009 1:41 am
Location: vancouver,wa

Post by SSmadness »

beatersubi wrote:Trust those clamps on the pressurized hose?
Which clamps on which hose? you have to remember,these cars,while stock have very little psi.If i were running a fully built motor and a ton of boost ida done the T-clamps.still might,i found a place for 3 bucks a peice. it all holds nicely with the mbc turned up to a little over half bar.
93 SS Winestone- PE 1820,rotated.UEL headers,catless uppipe, 3" bellmouth DP,custom intake,17'' Roto Torques,JIC coilovers

SSmadness
In Neutral
Posts: 26
Joined: Tue Feb 03, 2009 1:41 am
Location: vancouver,wa

Post by SSmadness »

mlitz123 wrote:do you think he would make more and ship them? because ihave a friend that might one.
he built the piping in house but i will talk to him to see if hed build one off the car.
93 SS Winestone- PE 1820,rotated.UEL headers,catless uppipe, 3" bellmouth DP,custom intake,17'' Roto Torques,JIC coilovers

SSmadness
In Neutral
Posts: 26
Joined: Tue Feb 03, 2009 1:41 am
Location: vancouver,wa

Post by SSmadness »

kimokalihi wrote:What's with the dryer hose?
Snorkus delete,ran 4inch flex duct to the passenger fog delete to feed the stock airbox with a k&n drop in filter.
93 SS Winestone- PE 1820,rotated.UEL headers,catless uppipe, 3" bellmouth DP,custom intake,17'' Roto Torques,JIC coilovers

subaru_styles
Third Gear
Posts: 690
Joined: Wed Mar 02, 2005 4:36 am
Location: vancouver/pdx

Post by subaru_styles »

your in vancouver too? haven't seen ya around
1994 SS "JDM-OEM"

1997 2.5gt wagon

1999 2.5gt wagon

1994 gt wagon

SSmadness
In Neutral
Posts: 26
Joined: Tue Feb 03, 2009 1:41 am
Location: vancouver,wa

Post by SSmadness »

yup,out in hazel dell.Do i hear a nw legacy meet and greet comin up?
93 SS Winestone- PE 1820,rotated.UEL headers,catless uppipe, 3" bellmouth DP,custom intake,17'' Roto Torques,JIC coilovers

Airgne
Second Gear
Posts: 480
Joined: Fri Jun 06, 2008 10:35 pm
Location: 横須賀  さいたま 日本

Post by Airgne »

SSmadness wrote:yup,out in hazel dell.Do i hear a nw legacy meet and greet comin up?


there will be one in woodland the first week of september.
1997 Nissan Laurel ClubS25t
2001 Legacy Gt Ltd(167awhp&165.7awtq)Best 00-04 Legacy at WCSS11(West Coast Subaru Show)
1992 Legacy SS(Sold)
1991 Legacy L Wagon(Sold)(400,000+miles and running strong!!)

SSmadness
In Neutral
Posts: 26
Joined: Tue Feb 03, 2009 1:41 am
Location: vancouver,wa

Post by SSmadness »

mlitz123 wrote:do you think he would make more and ship them? because ihave a friend that might one.

Yes he can make one or more,i think hed do a discount for more than one kit at a time and with out installation its going to be cheaper.
93 SS Winestone- PE 1820,rotated.UEL headers,catless uppipe, 3" bellmouth DP,custom intake,17'' Roto Torques,JIC coilovers

crashnburn
First Gear
Posts: 152
Joined: Wed Feb 10, 2010 9:19 am
Location: Covington, WA

Re: front mount intercooler install and parts........$600

Post by crashnburn »

why not just get the gc8 impreza fmic kit. cheaper and fitment is nearly perfect.

http://bbs.legacycentral.org/viewtopic.php?f=9&t=43043
91 Legacy SS 440s, vf39, FMIC, LSD, Revtronix Stage 2, MSD Coil

93forestpearl
Fifth Gear
Posts: 3043
Joined: Tue Jan 25, 2005 9:14 pm
Location: Twin Cities, MN

Re: front mount intercooler install and parts........$600

Post by 93forestpearl »

What's with bumping old threads?
→Dan

piddster34 at h0tma1l d0t c0m

208ss
First Gear
Posts: 99
Joined: Wed Jan 01, 2014 7:04 pm
Location: boise. id

Re: front mount intercooler install and parts........$600

Post by 208ss »

i know this is an old post but do you have any photos of how you cut the bumper beam? the part next to the headlamps?
1991 subaru legacy sport sedan

ride_child
Third Gear
Posts: 892
Joined: Thu May 03, 2012 6:24 am
Location: Enumclaw, WA
Contact:

Re: front mount intercooler install and parts........$600

Post by ride_child »

looks like he pretty much went straight down from the inside of the headlights or the width of the grill
Kris

'91 Mica White SS - R.I.P.
'88 White RX Turbo sedan - SOLD
'91 Black SS - SOLD
'93 Silver Turbo Wagon - Hibernation/Project Mode
'91 Black Camry Alltrac - R.I.P.
'09 DGM Forester XT Limited - Daily

91talon
In Neutral
Posts: 8
Joined: Fri Jul 24, 2015 12:57 pm

Re: front mount intercooler install and parts........$600

Post by 91talon »

There's a YouTube video that shows this process - of going behind the headlight. Done by a guy in NZ, I think it was.

Pntaste4evr99
Winestone Cowboy
Posts: 341
Joined: Thu Mar 26, 2015 4:12 am
Location: Lake Stevens WA

Re: front mount intercooler install and parts........$600

Post by Pntaste4evr99 »

U don't have to cut the whole front reinforcement, I just cut the inside of it to fit the intercooler core, granted the front facing part of the beam is only about 3mm thick, but some is better then none. But having a plasma cuter helps though lol
94 Winestone SS 5MT Rob 550 20g. (Pickle)
Original WA car with 460k miles and climbing

Post Reply