front mount intercooler install and parts........$600

SSmadness · Post by **SSmadness** » Sun May 17, 2009 7:42 pm

Hey guys,I wanted to pass along this great deal to you guys,if you want a fmic with piping and ic,installed! custom piping,couplers,intercooler all included in the price.he's my neihbor and just got done with mine....pics to come later today. did I metion the price? 600 bones.

kimokalihi · Post by **kimokalihi** » Sun May 17, 2009 11:26 pm

Installed you say? I want to see pictures!

stef1825 · Post by **stef1825** » Mon May 18, 2009 8:29 pm

... and more info

asc_up · Post by **asc_up** » Mon May 18, 2009 8:31 pm

stef1825 wrote:
... and more info

+1

SSmadness · Post by **SSmadness** » Tue May 19, 2009 5:57 am

beatersubi · Post by **beatersubi** » Tue May 19, 2009 6:03 am

Trust those clamps on the pressurized hose?

kimokalihi · Post by **kimokalihi** » Tue May 19, 2009 4:47 pm

What's with the dryer hose?

BXSS · Post by **BXSS** » Tue May 19, 2009 6:33 pm

Looks like a universal e-bay fmic kit cleanly installed on a car.
I like that there are not many connectors in the systen but I do not like the chopped up bumper beam.

I think the hose will feed the airbox which is pretty cool...

SSmadness · Post by **SSmadness** » Tue May 19, 2009 7:47 pm

Actually its not a kit at all.it was all fabbed by my neihbor and is now running an mbc and runs sooooo much better and half bar of real boost!!

mlitz123 · Post by **mlitz123** » Tue May 19, 2009 7:53 pm

do you think he would make more and ship them? because ihave a friend that might one.

SSmadness · Post by **SSmadness** » Tue May 19, 2009 9:55 pm

Big fmic=cuttin the bumper beam.

SSmadness · Post by **SSmadness** » Tue May 19, 2009 10:02 pm

beatersubi wrote:Trust those clamps on the pressurized hose?

Which clamps on which hose? you have to remember,these cars,while stock have very little psi.If i were running a fully built motor and a ton of boost ida done the T-clamps.still might,i found a place for 3 bucks a peice. it all holds nicely with the mbc turned up to a little over half bar.

SSmadness · Post by **SSmadness** » Tue May 19, 2009 10:04 pm

mlitz123 wrote:do you think he would make more and ship them? because ihave a friend that might one.

he built the piping in house but i will talk to him to see if hed build one off the car.

SSmadness · Post by **SSmadness** » Tue May 19, 2009 10:13 pm

kimokalihi wrote:What's with the dryer hose?

Snorkus delete,ran 4inch flex duct to the passenger fog delete to feed the stock airbox with a k&n drop in filter.

subaru_styles · Post by **subaru_styles** » Tue May 19, 2009 11:21 pm

your in vancouver too? haven't seen ya around

SSmadness · Post by **SSmadness** » Wed May 20, 2009 4:55 pm

yup,out in hazel dell.Do i hear a nw legacy meet and greet comin up?

Airgne · Post by **Airgne** » Thu May 21, 2009 1:42 am

SSmadness wrote:yup,out in hazel dell.Do i hear a nw legacy meet and greet comin up?

there will be one in woodland the first week of september.

SSmadness · Post by **SSmadness** » Thu May 21, 2009 9:19 am

mlitz123 wrote:do you think he would make more and ship them? because ihave a friend that might one.

Yes he can make one or more,i think hed do a discount for more than one kit at a time and with out installation its going to be cheaper.

crashnburn · Post by **crashnburn** » Wed May 26, 2010 5:11 am

why not just get the gc8 impreza fmic kit. cheaper and fitment is nearly perfect.

http://bbs.legacycentral.org/viewtopic.php?f=9&t=43043

93forestpearl · Post by **93forestpearl** » Wed May 26, 2010 5:40 am

What's with bumping old threads?

208ss · Post by **208ss** » Wed Jul 25, 2018 8:29 pm

i know this is an old post but do you have any photos of how you cut the bumper beam? the part next to the headlamps?

ride_child · Post by **ride_child** » Wed Jul 25, 2018 11:16 pm

looks like he pretty much went straight down from the inside of the headlights or the width of the grill

91talon · Post by **91talon** » Sat Jul 28, 2018 12:41 am

There's a YouTube video that shows this process - of going behind the headlight. Done by a guy in NZ, I think it was.

Pntaste4evr99 · Post by **Pntaste4evr99** » Sat Jul 28, 2018 9:23 pm

U don't have to cut the whole front reinforcement, I just cut the inside of it to fit the intercooler core, granted the front facing part of the beam is only about 3mm thick, but some is better then none. But having a plasma cuter helps though lol

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

front mount intercooler install and parts........$600

front mount intercooler install and parts........$600

Re: front mount intercooler install and parts........$600

Re: front mount intercooler install and parts........$600

Re: front mount intercooler install and parts........$600

Re: front mount intercooler install and parts........$600

Re: front mount intercooler install and parts........$600

Re: front mount intercooler install and parts........$600