Coolant Temp Sender Location - '93 Legacy NA Wagon

[frood]

Hey gang.

Vehicle:
1993 Subaru Legacy Wagon

Problem:
Bought a coolant temp sender (aka, little brass thing) to replace one that may be faulty, and cannot find where it is located. I -had- the chiltons manual, but cannot find it. Anyone with a picture or through description of location encourcaged to help. =)

Thanks a ton,
Chris Chirdon
Pittsburgh, PA

[vrg3]

There's a water manifold underneath the intake manifold. It goes from the front passenger-side corner (where the upper radiator hose attaches) to the rear driver-side corner (where a heater hose attaches). The coolant temperature sender and sensor are threaded into this water manifold on the passenger side. The one with a single spade terminal is the sender for the gauge, and the one with a brown 2-pin connector is the sensor for the ECU.

[Legacy777]

http://www.main.experiencetherave.com:8 ... P_2477.JPG

[frood]

Great; I got the pics I needed from that SUBY manual site. Great resource, to be sure. I'll plop it in while I'm replacing valve cover gaskets, the pass side axle, and the spark plugs.

<<SHAMELESS PLUG>>

http://www.cvaxles.com

Awesome place run by a pleasant guy who sells rebuilt CV axles for $55.00 +~10.00 shipping.

Cheers,
Chris
Pittsburgh, PA