Will the 92 tails fit on a 91??
Moderators: Helpinators, Moderators
Will the 92 tails fit on a 91??
will the 92 style tail lights bolt up to a 91 turbo sedan's trunklid or do you actually need a 92-94 trunklid for this?
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
I believe you need the newer trunklid for them, since the center section has lights in it.
Also, I don't believe the lights will bolt into the 91's taillight holes, since they are a different shape.
I haven't tried this myself, but I remember asking about it and that's what I remember hearing.
Also, I don't believe the lights will bolt into the 91's taillight holes, since they are a different shape.
I haven't tried this myself, but I remember asking about it and that's what I remember hearing.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
LegacyT
- Fourth Gear
- Posts: 1220
- Joined: Mon Oct 21, 2002 9:53 pm
- Location: Ottawa, Ontario, Canada, Now Sioux Lookout
it can be done, but you need a new trunk, rear bumper skin and beam and would have to sorta custom mount the newer tailights into the slots( ie drill new holes and cover the excessivly large 91 holes with sheet metal). It doesn't have to be neat, since the newer bumper skin is taller and will cover your work. I looked into it when I had my 91 and it wouldn't be too difficult.
Mark,
Mark,
1991 Turbo Sedan, Aspen White 5MT, Sold RIP
1994 Turbo Sedan, Crimson Pearl 5MT, from British Columbia-no rust!
1994 Turbo Sedan, Crimson Pearl 5MT, from British Columbia-no rust!
-
LaureltheQueen
- Spelling Nazi
- Posts: 4644
- Joined: Fri Aug 29, 2003 7:14 am
- Location: Lynnwood, WA
- Contact:
yeah the car's getting painted right after I finish all this work so that's not a big deal, if its just a matter of drilling a couple new holes I dont care, but I'm getting the new bumper cover already. Why would I need the new trunk lid, can't I just drill new holes in that also to make it bolt up or better yet not connect the lights for the trunk lid altogether? Please lemme know thanks!