P/B control units, different ones apparently?

kidwired · Post by **kidwired** » Wed May 25, 2005 9:54 pm

I just bought a control unit on ebay

it looks different than mine.
Mine is the green plastic box pn #88013AA060
auction said it fit 90-94 Legacy.
I dont have the pn for it yet, heres a pic

Hope it works!

IronMonkeyL255 · Post by **IronMonkeyL255** » Wed May 25, 2005 10:51 pm

Mine (from a '91) is a p/n 88013AA041.

Mine is metal, too.

Don't now if that helps any.....

Post by **Legacy777** » Fri May 27, 2005 4:52 am

remind me tomorrow.....I'll look in the parts book, and see if the different controllers have been superceeded by the newer part #'s.

tris91ricer · Post by **tris91ricer** » Fri May 27, 2005 6:05 pm

I'd think they were compatible/intechangeable. I only replaced the driver's side belt/rail assembly all the way down to the solenoids, as well as a computer from a 91 L. All belts work flawlessly..

kidwired · Post by **kidwired** » Sat May 28, 2005 4:38 pm

sounds like it could work.

Legacy777- checking P/n's might help me sleep better

I took my controller apart hoping to find an ez fix, like broken solder but no luck. I'm just not good enuff w/ electronics to figure out whats wrong.

Post by **Legacy777** » Sat May 28, 2005 5:09 pm

What you bought on ebay is the p/b controller for the station wagons. Since you have a sedan, the controller is in a different box.

I don't know if the internals are the same.....they probably are.....but it won't mount up the same as the sedan ones.

kidwired · Post by **kidwired** » Sun May 29, 2005 2:17 am

thanks josh, maybe I can mount the pb board in my box. Guess I'll see, theres always zip ties!

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

P/B control units, different ones apparently?

P/B control units, different ones apparently?