water return line from turbo

Flip_x · Post by **Flip_x** » Sat Jun 11, 2005 1:15 am

how hard is that to replace? mine just blew and im losing trust in my car right now. makes me just want to part it out....

does anyone know the part number? alright thanks alot..

-K- · Post by **-K-** » Sat Jun 11, 2005 2:30 am

If I remember it's close to 1/2" and I just used straight heater hose.

Flip_x · Post by **Flip_x** » Sat Jun 11, 2005 7:59 am

so i can just cut off the little metal cup that holds the heater hose and just use a clamp?

free5ty1e · Post by **free5ty1e** » Sun Jun 12, 2005 2:01 pm

little metal cup...?

Yes, if its just a straight or almost-straight piece of heater hose then it should be no problem to replace with a length from an auto parts store, and yes a standard screw clamp would work fine.

Flip_x · Post by **Flip_x** » Sun Jun 12, 2005 9:04 pm

they said they dont make heater hose that size. they told me i have to get it through subaru for that small heater hose.

what a crock of yeah....

free5ty1e · Post by **free5ty1e** » Sun Jun 12, 2005 9:45 pm

zuh? They do too sell 1/2" heater hose, they sell it all day down at discount auto parts and autozone - its standard crap. Thats odd that you are having trouble finding 1/2" heater hose.

Flip_x · Post by **Flip_x** » Mon Jun 13, 2005 3:06 am

nah i found one at napa, stupid kragen doesnt know crap..

IronMonkeyL255 · Post by **IronMonkeyL255** » Mon Jun 13, 2005 6:04 pm

They were probably too lazy to go get it........

I don't get why the stock hose was molded the way it was. It seems to have kinks and bends for no good reason.

Are there any of the coolant hoses that have any kind of restrictor or check valve?

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

water return line from turbo

water return line from turbo