Stuff for FREE & FS

Post by **Legacy777** » Sun Dec 18, 2005 5:46 am

fishbone79 · Post by **fishbone79** » Wed Oct 14, 2009 4:16 am

Josh- I know I'm bringing up a loooong dead thread, but did you ever sell this Tranquil transmission quill sleeve? If not, I'm interested... Let me know.

dropdfocus · Post by **dropdfocus** » Wed Oct 14, 2009 11:38 am

Yeah seriously...2005???

fishbone79 · Post by **fishbone79** » Wed Oct 14, 2009 12:25 pm

Ha. I know... but hey, it never hurts to ask!

kimokalihi · Post by **kimokalihi** » Wed Oct 14, 2009 1:51 pm

What's that sleeve thing do anyhow?

fishbone79 · Post by **fishbone79** » Wed Oct 14, 2009 2:59 pm

If the quill on the front of the transmission where the T.O. bearing rides is worn or grooved, clutch action won't be smooth because the bearing cannot slide without binding and/or pitching (could even hang up entirely)... That can mean uneven en/disengagement of the pressure plate and a chattery clutch, or it can pop the clips off and spin around, eventually wearing through the quill entirely. Mine has a pretty bad groove in it from spinning around and I can't find another tranny case locally.

kimokalihi · Post by **kimokalihi** » Wed Oct 14, 2009 3:03 pm

I see. I didn't notice there was a removable sleeve over the shaft.

fishbone79 · Post by **fishbone79** » Wed Oct 14, 2009 3:10 pm

There isn't one, usually. This is an adapter kit to put a sleeve over the worn quill and includes a throwout bearing with oversized ID to fit over the sleeve. Some people do it as a preventative thing.

kimokalihi · Post by **kimokalihi** » Wed Oct 14, 2009 3:14 pm

I see. I was thinking that it was either a replacement sleeve or a sleeve with an overside inner diameter throwout bearing.

Post by **Legacy777** » Wed Oct 14, 2009 6:14 pm

That's been a long while.....I'm pretty sure I sold it. If I still have it....I don't know where it is....which is why I believe I sold it.

Sorry.

fishbone79 · Post by **fishbone79** » Wed Oct 14, 2009 6:46 pm

Thanks, Josh. I figured it was a long shot, but thought I'd ask anyway. I was told they are back-ordered about a month, so If you come across that one, let me know

Post by **Legacy777** » Thu Oct 15, 2009 4:54 pm

Will do.

nutcase_sammy · Post by **nutcase_sammy** » Sat Oct 24, 2009 6:34 am

Is that drive shaft still up for sale? If so is it out of an auto or manual?

smh0101 · Post by **smh0101** » Sun Oct 25, 2009 3:31 am

kimokalihi wrote:I see. I didn't notice there was a removable sleeve over the shaft.

I... cant... resist... to... say... it...

Thats what she said!

nutcase_sammy · Post by **nutcase_sammy** » Sun Oct 25, 2009 5:57 am

I don't care who ya' are.....that there's funny.....yes sir!

Post by **Legacy777** » Sun Oct 25, 2009 10:21 pm

Driveshaft is long gone. It's at the scrap yard.

All the stuff above is gone.

nutcase_sammy · Post by **nutcase_sammy** » Sun Oct 25, 2009 10:46 pm

Ok, thanks anyway

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Stuff for FREE & FS

Stuff for FREE & FS