Hi, first of all I've already look at the Sticky for all the suspension but I don't understand a shit about it so here's my question, Can I use 2002 WRX coilsprings on my 98 Legacy Wagon ? Without any modifications ?
Thank you
Jo
2002 WRX coilsprings on a Wagon Legacy 1998 ?
Moderators: Helpinators, Moderators
-
6starnation
- In Neutral
- Posts: 2
- Joined: Sat Jan 14, 2006 1:02 am
-
Drifting STi
- First Gear
- Posts: 55
- Joined: Mon Jan 09, 2006 1:48 am
I have a 98 legacy wagon and I installed STi Coil springs. I can tell you that the legacy struts, top hats and mounts will not fit the STi springs.
You will need the entire set up. Springs struts tops and mounts. Here are some pics.
First: the diameter of the STi coil springs is smaller than the stock legacy and the top hats won't sit properly.
Second: the stock Sti strut mounts and lecacy mounts are identical.
My advice is for you to get the entire WRX set up......Struts mounts and tops.
You will need the entire set up. Springs struts tops and mounts. Here are some pics.
First: the diameter of the STi coil springs is smaller than the stock legacy and the top hats won't sit properly.
Second: the stock Sti strut mounts and lecacy mounts are identical.
My advice is for you to get the entire WRX set up......Struts mounts and tops.
Last edited by Drifting STi on Sun Feb 05, 2006 6:59 pm, edited 1 time in total.
-
Drifting STi
- First Gear
- Posts: 55
- Joined: Mon Jan 09, 2006 1:48 am
You might check the spring rates for each car and then decide if you want to go stiffer or softer.
Subtle (normally aspirated engines suck):
05 Legacy GT Wagon with Cobb chip.
62 Alfa Romeo Spider- had a 1.6 L with 80 hp, now 2 L with 160 torque. Curb weight 2050 lbs.
93 Leg Twgn fmic, vf34, etc. ((sold))
05 Legacy GT Wagon with Cobb chip.
62 Alfa Romeo Spider- had a 1.6 L with 80 hp, now 2 L with 160 torque. Curb weight 2050 lbs.
93 Leg Twgn fmic, vf34, etc. ((sold))
-
6starnation
- In Neutral
- Posts: 2
- Joined: Sat Jan 14, 2006 1:02 am
Ok so the STI coil arent the same as mine, but is it the same thing for the WRX coils ? Because i'm not looking to put OEM WRX coils, I want to put lowered one, and I can have a deal on some 2002 Whiteline springs ... I saw someone on Cardomain that has the same car exept its a 1996 and He has some Perrin WRX springs !