First off I did a search and didnt really find what I needed. As far as the question, the wiring diagram shows the (US) switch having 5 pins, and the (Europe) switch having 6 pins.
note:expand this pic 2X
What is the sixth pin for?, and are the 1-5 pins the same on both switches?
Any help would be great.
Wiring JDM Foglight switch question...........
Moderators: Helpinators, Moderators
-
- Fifth Gear
- Posts: 2275
- Joined: Mon Mar 08, 2004 2:30 am
- Location: Auburn, WA
- Contact:
Ok, you have dash light in and out, power to fogs in and out and switch light ground. The schematic you linked to only has 5 wires coming from the switch.
Are you going to try and wire it into your factory lighting?
I am just tappng off dash lights and accessory power line and running an aftermarket relay.
Are you going to try and wire it into your factory lighting?
I am just tappng off dash lights and accessory power line and running an aftermarket relay.
Yes I have too many Subarus
No you can't have one
05 GD-STI
01- RS- Swapped-07 STI
00- GF
93 SS- "the original Robtune" (now in new hands)
No you can't have one
05 GD-STI
01- RS- Swapped-07 STI
00- GF
93 SS- "the original Robtune" (now in new hands)
-
- First Gear
- Posts: 217
- Joined: Sat Oct 19, 2002 5:36 am
-
- Fifth Gear
- Posts: 2275
- Joined: Mon Mar 08, 2004 2:30 am
- Location: Auburn, WA
- Contact:
The sixth pin int he switch is for the fog lights to turn off when the high beams go on. Just like the newer cars. I did not use it .
Better off NOT using it. Complicates things.
Better off NOT using it. Complicates things.
Last edited by dscoobydoo on Tue Sep 08, 2009 4:16 am, edited 1 time in total.
Yes I have too many Subarus
No you can't have one
05 GD-STI
01- RS- Swapped-07 STI
00- GF
93 SS- "the original Robtune" (now in new hands)
No you can't have one
05 GD-STI
01- RS- Swapped-07 STI
00- GF
93 SS- "the original Robtune" (now in new hands)
-
- Fifth Gear
- Posts: 2275
- Joined: Mon Mar 08, 2004 2:30 am
- Location: Auburn, WA
- Contact: