Engne Knocking And Stalling

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
kurby89
In Neutral
Posts: 1
Joined: Wed Mar 08, 2006 2:20 am

Engne Knocking And Stalling

Post by kurby89 »

I have a 1991 subaru legacy L and when i start it in the morning it idles good then like 15 munits it stalls on me. I restart it without turning the key all the way off the engine will make a knocking noise and the tach is under 1 and bounces back up and down then shuts back off. I turn the key all the way off and restart it and its fine till i start goingdown the road i fel it starting to stall do i floor the gas pedal and it spudders then stalls and will keep doing that i hope some of you can help me on this if you need more information e-mail me kyleb04756@msn.com
thanks for your help>> :)

Also i replaced the crankshaft sensor and it seemed to help but 1 week after st started dying on me. I unplugged the ERG thingy and it has vacume and seems to help but it dosnt really
Manarius
Fourth Gear
Posts: 1755
Joined: Fri Jul 22, 2005 10:53 pm
Location: USA, PA, Grantham (near Harrisburg)
Contact:

Post by Manarius »

Coolant Temp Sensor.

Don't repost threads. kthxbye.
Manarius wrote:The Neo-Cons would call me a defeatist. I'd call me a realist. I'm realistically saying that a snowball has better chances in the blazes of hell than democracy has in Iraq.
1995 Polo Green Subaru SVX (189k miles - 08/2007-Present)
Legacy777
Site Admin
Site Admin
Posts: 27932
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

I've added your second post to your first.

Please be aware that you can reply to your own post if you want to add information. Also, you can edit your own posts if you have forgotten to add something.

Keeping all your questions/issues related to one topic in one thread makes keeping track of things and helping much easier.

Thanks
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply