FS: Tanabe GF210 springs with KYB GR2 struts

advansti · Post by **advansti** » Sun Mar 05, 2006 2:17 am

This is a full set ready to be installed; includes the strut tops. Been a '91 Turbo SS for about a 14 months and 6K. If you have any questions feel free to ask. Asking $400 shipped.

-Matt

Binford · Post by **Binford** » Sun Mar 05, 2006 5:34 am

If only you had this up about three weeks ago, I woulda bought 'em up quick.

advansti · Post by **advansti** » Sun Mar 05, 2006 3:58 pm

Thanks for the bump.

I've been waiting on parts to install my H&R coilovers so I didn't want to post it too early.

-Matt

thefultonhow · Post by **thefultonhow** » Fri Mar 10, 2006 3:33 am

Do you have any pictures? Do you know what the spring rate on the rear springs is, or have a part number for me to Google?

douglas vincent · Post by **douglas vincent** » Fri Mar 10, 2006 4:48 am

All 4 or just 2?

Where in Oregon?

advansti · Post by **advansti** » Fri Mar 10, 2006 7:54 am

They're springs for the '02-03 WRX; I've heard they are like 240lb/225lb or look at http://www.imprezamods.com/ Although I think that the specs got mixed up between the DF and GF springs. These are the stiffer/sport ones; 30% stiffer than the WRX. As with everything it all depends on where you're looking for the info.

I'm over in Bend if that helps. Yes thats everything: 4 tops, springs and struts. It's just a matter of removing what you have and bolting these in, no fuss, just go. Just finished putting the H&R's in today, so these should be ready to go after a little clean up. Clean up as in road cinders and some grease from a axle boot going out on me.

I do have some pics I just have to transfer them off the cam. Car does look/handle very balanced and the ride isn't harsh IMO.

thefultonhow · Post by **thefultonhow** » Fri Mar 10, 2006 11:44 pm

I'm going to pass -- looks like the rear spring rate is 2.8 kg/mm on Tanabe's site, which works out to 157 lb/in. Stock wagon springs are 190 according to the suspension compendium.

Thanks anyway, though!

advansti · Post by **advansti** » Mon Mar 20, 2006 4:41 am

GT Wagon · Post by **GT Wagon** » Tue Mar 28, 2006 1:38 pm

thefultonhow wrote:I'm going to pass -- looks like the rear spring rate is 2.8 kg/mm on Tanabe's site, which works out to 157 lb/in. Stock wagon springs are 190 according to the suspension compendium.

Thanks anyway, though!

Does that mean they're going to sag too low on a Legacy wagon ?

advansti · Post by **advansti** » Wed Apr 05, 2006 4:21 am

anyone?

advansti · Post by **advansti** » Sat Apr 29, 2006 11:57 pm

still available

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

FS: Tanabe GF210 springs with KYB GR2 struts

FS: Tanabe GF210 springs with KYB GR2 struts