SEARCHING FOR engine stand built of 2x4's thread.

azn2nr · Post by **azn2nr** » Mon Apr 10, 2006 7:57 pm

i need to build a temoprary engine stand and all i have are 2x4's . there was a thread earlier about it but i cant find it. doesn anyone have info on the dimensons of the oil pan so i can get started??

vrg3 · Post by **vrg3** » Mon Apr 10, 2006 8:02 pm

There's one discussed about a quarter of the way down this page:

http://www.cycoactive.com/Urabus/

Post by **Legacy777** » Tue Apr 11, 2006 6:06 pm

that would be my ghetto engine stand

http://bbs.legacycentral.org/viewtopic. ... gine+stand

Post by **Legacy777** » Tue Apr 11, 2006 6:08 pm

pics of it in use

http://www.main.experiencetherave.com:8 ... /ej22t/18/

azn2nr · Post by **azn2nr** » Tue Apr 11, 2006 6:39 pm

josh thats exactly what im looking for. do you have any idea what the distance is between the 2 sides. ie teh distance between the 2 vertical 2x4's

206er · Post by **206er** » Tue Apr 11, 2006 6:42 pm

first build the uprights, set the engine on them, mark where it needs to be and tack some 2x4s as the base. they dont even have tobe cut short, you could ad a little stability, not like it needs it though.

Post by **Legacy777** » Thu Apr 13, 2006 1:45 am

It's 19.5" from the center line of one vertical 2x4 to the centerline of the other vertical 2x4

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

SEARCHING FOR engine stand built of 2x4's thread.

SEARCHING FOR engine stand built of 2x4's thread.