EJ22T engine parts Block-Crank-Pistons Etc...
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
EJ22T engine parts Block-Crank-Pistons Etc...
I have some stuff that i need to sell off, i have to move and need to get some $$ up quick (a@@ hole landlords )
Updated:
EJ22T Crank $100
EJ22T Connecting rods $70
EJ22T Heads (both left and right) $90
EJ22T Intake w/ Pink top injectors (No fluid resivore) $offer?
Packaged deal: Buy the Crank and Connecting Rods for $150 plus shipping
Plus i have the complete engine worth of parts and some N/A Parts
OEM MY92-94EJ22 N/A Injectors/Fuel Rails $50 set
Alternator $60
A/C Condensor (worked, but last year has been in storage) $50
Valve Covers (R&L) $50 ($25 if purchased with the heads)
ECU $80
Wiring harness $100 (Everything has been removed except for what is needed for the engine to run, we stripped it for a open wheel center driver hillclimb car, which work has now stopped on)
TCU $50
Cam Shaft Pullies $25 pair
EJ22T OEM Engine Mounts $25 pair
2 91 EJ22T OEM Mass Airflow Sensors $50ea
Down pipe was cut to mod, but never was modded. (flange and 3" piece is still available).
Only thing im really planning on keeping is the turbo & Exhaust Manifolds
All items will be shipped FEDEX ground, buyer to pay shipping costs.
Prefer paypal but im not picky, i need the $$.
Thanks!
Sam
SOLD Stuff
EJ22T Block - **SOLD**
(Fresh bath, and honing)
EJ22T Forged Pistons & Wrist Pins (Thrown in with the pistons as a freebie)
Updated:
EJ22T Crank $100
EJ22T Connecting rods $70
EJ22T Heads (both left and right) $90
EJ22T Intake w/ Pink top injectors (No fluid resivore) $offer?
Packaged deal: Buy the Crank and Connecting Rods for $150 plus shipping
Plus i have the complete engine worth of parts and some N/A Parts
OEM MY92-94EJ22 N/A Injectors/Fuel Rails $50 set
Alternator $60
A/C Condensor (worked, but last year has been in storage) $50
Valve Covers (R&L) $50 ($25 if purchased with the heads)
ECU $80
Wiring harness $100 (Everything has been removed except for what is needed for the engine to run, we stripped it for a open wheel center driver hillclimb car, which work has now stopped on)
TCU $50
Cam Shaft Pullies $25 pair
EJ22T OEM Engine Mounts $25 pair
2 91 EJ22T OEM Mass Airflow Sensors $50ea
Down pipe was cut to mod, but never was modded. (flange and 3" piece is still available).
Only thing im really planning on keeping is the turbo & Exhaust Manifolds
All items will be shipped FEDEX ground, buyer to pay shipping costs.
Prefer paypal but im not picky, i need the $$.
Thanks!
Sam
SOLD Stuff
EJ22T Block - **SOLD**
(Fresh bath, and honing)
EJ22T Forged Pistons & Wrist Pins (Thrown in with the pistons as a freebie)
Last edited by stant093 on Wed May 03, 2006 6:14 pm, edited 7 times in total.
Coolant Fill Reservoir~
Nvm, i just saw "no fluid reservior" bummer....sent email inquring about it anyway.
***edited***
***edited***
Subaru Impreza Ver6 replica with Ver4 Type R motorset.
Mitsubishi Evolution 4 replica with Evo4 GSR motorset.
Mitsubishi Evolution 4 replica with Evo4 GSR motorset.
-
- quasi-mod-o
- Posts: 2574
- Joined: Sun Nov 09, 2003 8:24 pm
- Location: Ghetto Garage, CO, USA
- Contact:
It's almost disgusting what blocks can gather on ebay these days, they easily sell for $300 to $400.
Personally, and I'm not ragging on you, but I picked up my entire long block, turbocharger, headers, up pipe, intake, throttle body, all sensors, and all the little accessories (sans flywheel and driven accessories) for $625 shipped.
good luck.
Personally, and I'm not ragging on you, but I picked up my entire long block, turbocharger, headers, up pipe, intake, throttle body, all sensors, and all the little accessories (sans flywheel and driven accessories) for $625 shipped.
good luck.
91 Legacy Wagon, Total Rally Car.
#82 M4 TRSCCA Rallycross
http://www.youtube.com/mobilepolice/
#82 M4 TRSCCA Rallycross
http://www.youtube.com/mobilepolice/
-
- quasi-mod-o
- Posts: 6000
- Joined: Thu Dec 05, 2002 7:06 pm
- Location: Tampa, FL
Damn, I'd take the pistons, rods and crank if I had the dough.
2000 Subaru Legacy B4 RSK
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"
*Formerly DerFahrer*
@entirelyturbo on social media, including Facebook, Instagram, Twitter, and TikTok
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"
*Formerly DerFahrer*
@entirelyturbo on social media, including Facebook, Instagram, Twitter, and TikTok
-
- quasi-mod-o
- Posts: 2574
- Joined: Sun Nov 09, 2003 8:24 pm
- Location: Ghetto Garage, CO, USA
- Contact:
Dude, You obviously misunderstood my intent. I was actually trying to be helpful and give you some insight into that board and the people there. Here in Colorado, all the Ej22 folks have each other's phone numbers and know where the piles of parts are, and we all sell them really cheap. There are also people on that board who would slam you for joining just to sell yourstuff since it's a very tight nit community with a lot of IRL interaction. We don't exclude non-Rocky Mtn people, but if someone outside the area joins just to sell parts, they usually get chased off. If you had been open to my suggestions on your pricing, I would have actually vouched for you with the locals since I knew you from this board. If you took all of that as some sort of personal insult or pissing on your thread, I don't know what to tell you. If you don't sell the block by the time you have to move and want to reconsider, you know where to find me...stant093 wrote:considering the thread crap you gave me earlier, ill pass even if it has no bids.
1974 Porsche 914 Cam Am Limted Edition AKA the Bumble Bee
1973 Porsche 914 2.0 l -Suby swap pending
1968 Porsche 911t survivor 47k original miles
2000 2.5RS daily driver.
1999 2.5RS w/ 50+ extra whp
Suby Hai!
1973 Porsche 914 2.0 l -Suby swap pending
1968 Porsche 911t survivor 47k original miles
2000 2.5RS daily driver.
1999 2.5RS w/ 50+ extra whp
Suby Hai!
-
- quasi-mod-o
- Posts: 2574
- Joined: Sun Nov 09, 2003 8:24 pm
- Location: Ghetto Garage, CO, USA
- Contact:
Pace or Zem didn't remove it. I did after you took your list of parts down...stant093 wrote:Thanks but i did take it as a thread crap, and so didnt the mods, thats why your comment was removed.
No offense taken, but think before you post, words dont show expressions.
Lets just leave it at that, O.K.
1974 Porsche 914 Cam Am Limted Edition AKA the Bumble Bee
1973 Porsche 914 2.0 l -Suby swap pending
1968 Porsche 911t survivor 47k original miles
2000 2.5RS daily driver.
1999 2.5RS w/ 50+ extra whp
Suby Hai!
1973 Porsche 914 2.0 l -Suby swap pending
1968 Porsche 911t survivor 47k original miles
2000 2.5RS daily driver.
1999 2.5RS w/ 50+ extra whp
Suby Hai!
bump -
(I will sell the Block, Oil pump, Water pump, Pistons, Connecting rods, and Crank for $700 (Thats saving you $100 if your bidding on ebay (Reserve price - Block $600 + $100 Pistons/Connect Rods + $100 Crank (and will travel to: NH, ME, MA, Conn to drop off for an extra $50) I need the $$ ASAP!)
(I will sell the Block, Oil pump, Water pump, Pistons, Connecting rods, and Crank for $700 (Thats saving you $100 if your bidding on ebay (Reserve price - Block $600 + $100 Pistons/Connect Rods + $100 Crank (and will travel to: NH, ME, MA, Conn to drop off for an extra $50) I need the $$ ASAP!)
-
- In Neutral
- Posts: 9
- Joined: Mon May 29, 2006 7:52 am
- Location: Indiana & NJ