Parting out 2 Legacy Turbos

LegacyPGT · Post by **LegacyPGT** » Tue Apr 18, 2006 4:46 pm

Well since I hade a little encounter with my rally car and a tree at 100aw rally this year I'm parting everything out. The rally car is a 93 and the parts car is a 91. I am keeping the block, gearbox, rear diff, and crossmembers, other then that everything is up for grabs.
Multiple things
3 ECU's
2 TCU's
3 VF-11 Turbos
3 sets of heads
3 sets of rear calipers with rotors
3 sets of front calipers with rotors
12 15" turbo wheels
Auto transmission, shifted very well, out of the 91
Full interior out of both cars
headlights and tail lights from both cars
2 sunroofs

Make an offer on anything and everything.

Project_Legacy · Post by **Project_Legacy** » Tue Apr 18, 2006 8:53 pm

the front calipers are the 2 piston calipers correct? they should just be able to bolt onto an N/A car right?

the turbo rear calipers are bigger than the N/A rear calipers right?

what is a ballpark figure you would want for a set of front and rear calipers? i dont wanna lowball... and i dont know how much they go for... so im gonna say 50 dollars plus shipping to 98404??

let me know! thanks

FNSTI · Post by **FNSTI** » Tue Apr 18, 2006 11:40 pm

hey wondering if you have front springs from a turbo and if youll do jsut rear turbo calipers and hangers- no rotors.. shipping would be to 80022. thanks..

rallylegacy57 · Post by **rallylegacy57** » Wed Apr 19, 2006 1:50 am

How much for 4 wheels?

Manarius · Post by **Manarius** » Wed Apr 19, 2006 2:09 am

Project_Legacy wrote:the front calipers are the 2 piston calipers correct? they should just be able to bolt onto an N/A car right?

the turbo rear calipers are bigger than the N/A rear calipers right?

what is a ballpark figure you would want for a set of front and rear calipers? i dont wanna lowball... and i dont know how much they go for... so im gonna say 50 dollars plus shipping to 98404??

let me know! thanks

Bigger yes. However, you'll need 15in. or bigger rims to fit the front calibers. 14in. should clear the rear calibers, but we're not sure about that.

Binford · Post by **Binford** » Wed Apr 19, 2006 2:24 am

Manarius wrote:
Project_Legacy wrote:the front calipers are the 2 piston calipers correct? they should just be able to bolt onto an N/A car right?

the turbo rear calipers are bigger than the N/A rear calipers right?

what is a ballpark figure you would want for a set of front and rear calipers? i dont wanna lowball... and i dont know how much they go for... so im gonna say 50 dollars plus shipping to 98404??

let me know! thanks
Bigger yes. However, you'll need 15in. or bigger rims to fit the front calibers. 14in. should clear the rear calibers, but we're not sure about that.

I've had 14" XT6 wheels on the back of my SS in order to flat-tow it with no tranny. 14" wheels definately DON"T fit over the front turbo brakes.

greg donovan · Post by **greg donovan** » Wed Apr 19, 2006 5:40 am

mike i too would like to know how much for 4 of the wheels.

i would find a way to pick them up if i were to buy them.

shoot me a PM.

LegacyPGT · Post by **LegacyPGT** » Wed Apr 19, 2006 8:52 am

PM's sent to almost everybody

stipro · Post by **stipro** » Wed Apr 19, 2006 8:42 pm

PM'ed you. Thanks.

tleon · Post by **tleon** » Tue May 02, 2006 9:49 am

HI MIKE, DO YOU HAVE THE 4WD TURBO BADGE?

Project_Legacy · Post by **Project_Legacy** » Tue May 02, 2006 5:14 pm

i havent got another pm back from ya...

gregbolby · Post by **gregbolby** » Sat Jun 03, 2006 4:11 am

you still have any of the turbos left?

Thanks

Greg

Radial GT1 · Post by **Radial GT1** » Sun Jun 04, 2006 3:36 pm

I need an air bag computer and a (1) center cap for the 93 style rims. You sporting?

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Parting out 2 Legacy Turbos

Parting out 2 Legacy Turbos

turbo legacy parts