cam cap specs.......

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
thehookeup
Third Gear
Posts: 619
Joined: Wed Feb 22, 2006 5:14 am
Location: portland OR

cam cap specs.......

Post by thehookeup »

EJ20G heads. i need the torque specs for the cam caps
-93 2.2T (RIP), 93 N/A best car on earth.
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
Top
napphappy
Second Gear
Posts: 512
Joined: Fri Jun 03, 2005 12:57 am
Location: Gig Harbor, WA

Post by napphappy »

The two rear caps 13-16 Ft-lb
The front one 6.7-7.7 Ft-lb
1997 White BG Ltd 5MT, EJ22T with Wiescos, EJ20R Heads, Two large dents R.I.P
1995 Impreza EJ22T DOHC Hydra EMS, 20g, EWG, 3in APS TBE, AWIC
Top
thehookeup
Third Gear
Posts: 619
Joined: Wed Feb 22, 2006 5:14 am
Location: portland OR

Post by thehookeup »

so the front one is 6.7-7.7 and then the two inside ones are 13-16? and this is on intake came and exhaust?
-93 2.2T (RIP), 93 N/A best car on earth.
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
Top
napphappy
Second Gear
Posts: 512
Joined: Fri Jun 03, 2005 12:57 am
Location: Gig Harbor, WA

Post by napphappy »

Yes
1997 White BG Ltd 5MT, EJ22T with Wiescos, EJ20R Heads, Two large dents R.I.P
1995 Impreza EJ22T DOHC Hydra EMS, 20g, EWG, 3in APS TBE, AWIC
Top
thehookeup
Third Gear
Posts: 619
Joined: Wed Feb 22, 2006 5:14 am
Location: portland OR

Post by thehookeup »

thanx man i owe ya
-93 2.2T (RIP), 93 N/A best car on earth.
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
Top
Post Reply

Return to “Engine”