what size are these ebay injectors?

biggreen96 · Post by **biggreen96** » Thu Jul 27, 2006 9:15 pm

http://cgi.ebay.com/ebaymotors/FUEL-INJ ... dZViewItem

are these the grey tops from a twin turbo like redevil has? I sent a email to the seller as well, I just wanted the extra opinions

douglas vincent · Post by **douglas vincent** » Thu Jul 27, 2006 11:31 pm

I think they are the same as mine, i think.....

But I would not buy them cause of the 0 feedback.

douglas vincent · Post by **douglas vincent** » Thu Jul 27, 2006 11:34 pm

Here is a much much better deal!

http://cgi.ebay.com/ebaymotors/240sx-SR ... dZViewItem

biggreen96 · Post by **biggreen96** » Fri Jul 28, 2006 12:12 am

that auction is for just 2 555's
I want ~425's because it's near the 20% cut off. I will be doing a vf39 and a custom front mount intercooler. I want to join the 1 bar club.

douglas vincent · Post by **douglas vincent** » Fri Jul 28, 2006 1:28 am

Whoops, missed that part!

douglas vincent · Post by **douglas vincent** » Fri Jul 28, 2006 1:30 am

Maybe these?

http://cgi.ebay.com/ebaymotors/New-Stan ... dZViewItem

biggreen96 · Post by **biggreen96** » Fri Jul 28, 2006 8:03 pm

those are just a bit bigger than I want. I remember reading on here somebody used ~440's and a vf39 on the stock ecu without issue and that is the route I'm interested in.

NICO · Post by **NICO** » Mon Jul 31, 2006 9:42 am

those first injectors you posted will not fit the rails from a ej22t or any north american subaru. australia and japan intake manifold only, or custom make the stock rails they come wit fit to work but you would need a lot of work.

biggreen96 · Post by **biggreen96** » Mon Jul 31, 2006 7:53 pm

really? ?? cause I just bought them! gahhhh!

douglas vincent · Post by **douglas vincent** » Mon Jul 31, 2006 9:41 pm

You bought these right?

They fit 91 NA rails, I think also 92-93

biggreen96 · Post by **biggreen96** » Mon Jul 31, 2006 10:01 pm

yeah. I have the NA rails too already. So you are using your greys in NA rails right?

douglas vincent · Post by **douglas vincent** » Mon Jul 31, 2006 10:23 pm

biggreen96 · Post by **biggreen96** » Tue Aug 01, 2006 12:11 am

Well then it appears that I'm on the right track...

Now to brush up on my aluminum welding skillz and whip up some endtanks for the f350 intercooler I have.

NICO · Post by **NICO** » Wed Aug 02, 2006 4:25 am

are you 100% they fit the n/a rials i have a set of 480cc injectors from a ej20k motor and they look the same and i mean the same.

ej25 ej18 ej20 n/a rials did not work with the injectors that look the same as the ones you just got.

i got pics

douglas vincent · Post by **douglas vincent** » Wed Aug 02, 2006 7:51 am

I bought a twin turbo JDM motor and pulled the injectors out and stuck them in 91 AUTO fuel rails. And they fit. And they work. Thats the facts and all I know. And they are 430 cc.

biggreen96 · Post by **biggreen96** » Wed Aug 02, 2006 5:43 pm

hey nico post them pics up.

biggreen96 · Post by **biggreen96** » Sun Aug 06, 2006 12:16 am

well I just received the ebay injectors and they are in good shape. I'm amazed that he shipped them so quickly.
I bought a vf39 for $100 but it needs a little work, it's leaking oil...

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

what size are these ebay injectors?

what size are these ebay injectors?