so i am finally ripping back into the old t leg. its running on a NA ecu.. and its all good until i floor it from a stop and it goes crazy RICH. until i back off and then ease into the gas, and it runs great. otherwise it bogs and wants to die....so i am buying a turbo ecu. for those of you who dont know. i fried my stock ecu after having my VRG3 FCD in.(no offense to you vrg. i just dont wanna fry another ecu. they are too hard to find. it worked great for like 3 weeks and then died).
Now you may ask, why not just get engine managment. well here is my thought. it ran soooooooooooooooo good with the stock ecu bigger injectors and the fcd. at 18 psi. so i am going back to square one with it.
But my question is will this fcd work, i dont see why not but before i throw 90 bucks at it i wanna know.
http://cgi.ebay.com/ebaymotors/HKS-FCD- ... enameZWDVW
http://search.ebay.com/search/search.dl ... category0=
thanks for the help guys
HKS FCD
Moderators: Helpinators, Moderators
-
thehookeup
- Third Gear
- Posts: 619
- Joined: Wed Feb 22, 2006 5:14 am
- Location: portland OR
HKS FCD
-93 2.2T (RIP), 93 N/A best car on earth.
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
-
thehookeup
- Third Gear
- Posts: 619
- Joined: Wed Feb 22, 2006 5:14 am
- Location: portland OR
-
thehookeup
- Third Gear
- Posts: 619
- Joined: Wed Feb 22, 2006 5:14 am
- Location: portland OR
dont worry guys lol. jk the car runs, but the real test will be tomorrow when i really get down on the gas
-93 2.2T (RIP), 93 N/A best car on earth.
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew