Struts, spring, anti-rollbars, braces and the like.
Moderators: Helpinators , Moderators
Splinter
Knowledgeable
Posts: 3058 Joined: Tue Aug 02, 2005 11:12 pmLocation: Victoria, BC
Post
by Splinter Sat Aug 05, 2006 3:12 am
Springs, struts and tophats with about 12,000km on them. $250
Anything tricky about installing them or should they bolt up?
98 Steel Widebody RSTi-RA Superbeast
Imprezive
Fourth Gear
Posts: 1428 Joined: Wed Jun 22, 2005 4:07 amLocation: Northern CA
Post
by Imprezive Sun Aug 06, 2006 5:19 pm
Rear top mounts wont work, you have to either drill holes or buy Group N mounts. If you try using your stock rear top mounts you cannot use the wrx springs. The front should be good to go.
1992 T-Leg = 195whp 197wtq SOLD :(
jamal
Vendor
Posts: 2485 Joined: Thu Dec 11, 2003 11:34 amLocation: Missoula
Contact:
Post
by jamal Mon Aug 07, 2006 5:23 am
Actually you just need to use your rear tops and spring perches with the strut and spring. You will have a degree or more less negative camber all around though.
Imprezive
Fourth Gear
Posts: 1428 Joined: Wed Jun 22, 2005 4:07 amLocation: Northern CA
Post
by Imprezive Mon Aug 07, 2006 5:24 am
Do the 92'-94' have un-tappered springs???
1992 T-Leg = 195whp 197wtq SOLD :(
jamal
Vendor
Posts: 2485 Joined: Thu Dec 11, 2003 11:34 amLocation: Missoula
Contact:
Post
by jamal Mon Aug 07, 2006 6:03 am
yes it is also in the sticky about impreza springs.
tris91ricer
Title Whore
Posts: 2692 Joined: Mon Dec 01, 2003 7:19 amLocation: Valdosta, GA
Post
by tris91ricer Tue Aug 08, 2006 12:23 am
Cool, Splinter! I also just got 02 wrx suspension, but its for a wagon . . Bfd, if you ask me. I'm throwing on the gn tops and some 05 sti springs.
[b]'92 L Sedan[/b]
Splinter
Knowledgeable
Posts: 3058 Joined: Tue Aug 02, 2005 11:12 pmLocation: Victoria, BC
Post
by Splinter Tue Aug 15, 2006 5:14 am
Front strut assembly went in without a hitch, ride height looks to be almost exactly the same.
98 Steel Widebody RSTi-RA Superbeast
