Like the topic says. The tab that holds it in gave out and using tape to hold it in isn't very pretty. Shoot me a PM with a price shipped to 33186 (Miami, FL).
Thanks.
WTB: Driver's side corner light (93 SS)
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
WTB: Driver's side corner light (93 SS)
MY93 EJ22T @ +1BAR
you can replace the broken tab with a short section of plastic/ strap, and a small screw. drill the hole in the strap, and into the light, then use the screw to attach. I can post a picture of how i did this on mine if you need reference. I used a plastic piece off a plastic clamp of some sort. Anything with rubber-made like plastic will work, just need a short narrow section of it. Small screw right over top of where the factory tab was attached to light......easy and cheap......
anybody got non scrathced 92-94 lights that have broken tabs, i could use a few...and i will fix those tabs. Lots more reliable and secure than the brittle oem tabs.
anybody got non scrathced 92-94 lights that have broken tabs, i could use a few...and i will fix those tabs. Lots more reliable and secure than the brittle oem tabs.
91 Legacy Sport Sedan 4eat
91crx si 165k
91 Civic RT4WD manual trans 168k
91crx Si 40.5k
85 BRAT Gl 140
97 SVX 74k
91crx si 165k
91 Civic RT4WD manual trans 168k
91crx Si 40.5k
85 BRAT Gl 140
97 SVX 74k