So my friend has a 91 ss 4eat ive been looking at recently trying to help bestow my personal SS repair experiences upon. After suggesting a few things like new oil sender gasket (leaky) and knock sensor (throwing code) i come to discover his brake lights dont work at all. His driving lights work fine, the bulbs are good, and the fuse is good. The spoiler light doesnt work either.
Im planning on taking a multimeter and checking the brake switch but does anyone have any ideas of what else to check? Also is there a relay hidden somewhere for the lights.
No brake lights
Moderators: Helpinators, Moderators
-
Threshld1
- Second Gear
- Posts: 529
- Joined: Mon Dec 26, 2005 12:53 am
- Location: Artic Tundra - MN
- Contact:
No brake lights
93 SS 5MT - TD05H-16G, 06 TMIC, Walbro, Zeitronix WB-02 - Scrapped too much rust
91 SS AT
97 Outback - Prodrive quick rack, DMS 40
91 SS AT
97 Outback - Prodrive quick rack, DMS 40
Check the brake pedal switch
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
Threshld1
- Second Gear
- Posts: 529
- Joined: Mon Dec 26, 2005 12:53 am
- Location: Artic Tundra - MN
- Contact:
switch was bad, so i replaced it but it changed nothing. lights still dont work. Do these lights depend on the shift interlock unit to work? His interlock solenoid isnt switching either. I show 12v on the always hot line going to the brake switch and i show continuity through the switch when its released. Ideas?
93 SS 5MT - TD05H-16G, 06 TMIC, Walbro, Zeitronix WB-02 - Scrapped too much rust
91 SS AT
97 Outback - Prodrive quick rack, DMS 40
91 SS AT
97 Outback - Prodrive quick rack, DMS 40