WTB: 5MT Turbo Wiring Harness

Splinter · Post by **Splinter** » Fri Nov 03, 2006 7:16 am

I figure while Ive got my car in pieces I might as well get rid of the 4EAT harness.

dwreck30 · Post by **dwreck30** » Fri Nov 03, 2006 7:51 am

What do you mean? All the wires up in the dash and everything? Actually it doesn't really matter because I have all of it. Let me know what you want, I'm taking the heater core out of it so it'll be easy to get at.

Splinter · Post by **Splinter** » Sat Nov 04, 2006 12:51 am

eeerrrmmm

Eveyrthing that goes between the engine and the ECU I suppose.

dwreck30 · Post by **dwreck30** » Sat Nov 04, 2006 1:49 am

Ok, what timeframe is there on getting this stuff to you? It's kinda cold so working on the car is slowgoing.

Splinter · Post by **Splinter** » Sat Nov 04, 2006 4:22 am

2 months?

dwreck30 · Post by **dwreck30** » Mon Nov 06, 2006 2:34 am

Well I got bored today and got all of it out. There are two bad things though. I used this harness to swap in my 5MT, so it is missing the connector for the reverse lights/neutral switch. Second the wires going to the ignition were cut so I could make up a PNP harness for the clutch switch. Both of these could be easily fixed especially since it is out of the car. I followed Josh's write up for the 5MT swap so it is all on here for you to look at. Let me know what you want to do. Thanks

Splinter · Post by **Splinter** » Mon Nov 06, 2006 3:36 am

So this is a converte 4EAT harness?

If thats what it is, im not interested, cuz thats what I already have

dwreck30 · Post by **dwreck30** » Mon Nov 06, 2006 4:44 am

No, it is a 5mt harness with the connector cut off so I could use it on my swap.

Splinter · Post by **Splinter** » Mon Nov 06, 2006 9:04 am

How much do you want for it?

dwreck30 · Post by **dwreck30** » Tue Nov 07, 2006 1:09 am

I don't know. I already have it out and won't throw it away if you want it, so just give me an offer shipped. I'd figure no more than $15 for shipping.

Splinter · Post by **Splinter** » Mon May 14, 2007 1:40 am

Bump this back up... I need one again

555BCTurbo · Post by **555BCTurbo** » Mon May 14, 2007 1:56 am

What do you want to pay for it?

Splinter · Post by **Splinter** » Mon May 14, 2007 1:58 am

I paid $100 for a JDM EJ20G bulkhead harness from Matt Monson... Id like to be somewhere around there. Keep in mind I dont need sensors or anything.

dwreck30 · Post by **dwreck30** » Tue May 15, 2007 2:48 am

Ha, finally threw mine away last week.

Splinter · Post by **Splinter** » Mon May 28, 2007 10:14 pm

Im badly hurting for this guys!!

I need it to get to WCSS9!

555BCTurbo · Post by **555BCTurbo** » Tue May 29, 2007 5:13 am

$100 will work for me...

Shoot me a PM

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

WTB: 5MT Turbo Wiring Harness

WTB: 5MT Turbo Wiring Harness