difference between power mode and manual mode on an auto.?

SPARTUS · Post by **SPARTUS** » Tue Oct 07, 2003 9:10 pm

As the topic say's...When do you folks use either of these modes?

mTk · Post by **mTk** » Tue Oct 07, 2003 9:18 pm

I'm sure it can be found elsewhere on the board, but:

Power mode just alters the shift map slightly during heavy acceleration.

The manual button prevents the tranny from going downshifting into first, but only when the selector is in 2 or 3.

When i use them.. power mode all the time since driving fast is fun

sometimes when it is rainy or snowy i'll pop on the manual button just to keep a bit of traction from a stop.

MK

Post by **Legacy777** » Tue Oct 07, 2003 11:43 pm

http://www.surrealmirage.com/subaru/trans.html

Qman4x4 · Post by **Qman4x4** » Wed Oct 08, 2003 1:40 am

Once again and as usual Josh, nice job!!

mTk · Post by **mTk** » Wed Oct 08, 2003 2:49 am

Bah, so it's like i said

MK

Post by **Legacy777** » Thu Oct 09, 2003 2:38 am

mk750 wrote:Bah, so it's like i said

MK

yup....

SPARTUS · Post by **SPARTUS** » Fri Oct 10, 2003 1:13 am

thanks

ciper · Post by **ciper** » Wed Nov 19, 2003 8:07 am

Josh's page is exactly right except

"3 position the transmission chooses between 2nd and 3rd gear."

It should say

3 position stays in 2nd gear until XMPH when it will stay in third from then on until speed again drops below XMPH regardless of throttle position

XMPH needs to be accuratly verified.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

difference between power mode and manual mode on an auto.?

difference between power mode and manual mode on an auto.?