92 SS Interior partout + more (Good stuff for 5MT swap)

Splinter · Post by **Splinter** » Mon Jan 22, 2007 4:09 am

Thats right, its all going! All prices CAD, not including shipping

Everything except for the carpet, front door cards and dash.

Its got the nice suede/leather seats, theres a small rip in the drivers seat bolster. The backs of the rear seats have been drilled for an amp, but its in the back, so who cares.

Aside from the obvious, this also includes rear seatbelts.

Also up for grabs, prices are negotiable:

Stage 1 Exedy Clutch with 2000km on it - $400
EJ22T heads (two sets) - $100 ea
EJ22T complete intake manifold - $100
EJ22T uppipe - $20
EJ22T downpipe - $40 - SALE PENDING
JDM TD04 (90 degree inlet pipe) - $120 - SALE PENDING
VF11 100K miles on it - $60
Legacy 5MT pedals - $40 - SOLD
Legacy shifter assm. including WRX leather boot - $50 - SALE PENDING
Airbox + MAF - $70
EJ22T Stock flywheel - $20
EJ20G RS-RA flywheel - $40
Red 98 DOHC RS manifold incl some sensors, throttle has been machined down for intercooler firewall clearance + throttle - $80
15" Outback sport wheels (same as legacy with polished rim), no curbage, some scratches - $120 - SALE PENDING
Legacy alternator - $50
Brand new 92-94 EJ22T waterpump - $70
EJ22T Oilpump within stock spec - $20
EJ22T Tensioner + bracket - $20
EJ22E Engine cover (no label) - $5
WRX engine mounts - $60 - SALE PENDING
WRX 5MT crossmember - $50
EJ22E 5MT - $250
EJ22T 5MT front diff - $50 - SALE PENDING
EJ22T 5MT center diff - $50
EJ22T tranny case - $20 - SALE PENDING
STI rear struts (red) - $150
EJ22T Turbo-Manifold piping - $20
Slant style intercooler - $40 front back - SOLD

More to come once me and my roomie look over the storage locker. We're pretty sure of what we need for our swaps now so we're getting rid of the extras.

Blackbart · Post by **Blackbart** » Mon Jan 22, 2007 5:24 am

You got PM'd

Post by **Legacy777** » Mon Jan 22, 2007 8:04 pm

Splinter,

Any chance you guys have run across a 90-91 Legacy with tan interior with manual belts? If so I'd kill for all the trim, belts, etc to make it work in my legacy.

Splinter · Post by **Splinter** » Mon Jan 22, 2007 10:35 pm

Give the guys at Saltair Auto Recycling a call

250-245-4175

They're in BC, a bit north of me

Splinter · Post by **Splinter** » Tue Jan 23, 2007 1:08 am

List updated

BAC5.2 · Post by **BAC5.2** » Tue Jan 23, 2007 1:42 am

Do I ever get a present for guessing all the shit in that picture?

Let me know if you let the carputer go.

Splinter · Post by **Splinter** » Tue Jan 23, 2007 4:04 am

Oh crap I totally forgot about that!

Send me your address again, Ill get you something ASAP

Carputer wont be sold, I need it for the Standalone

RS25 · Post by **RS25** » Wed Jan 24, 2007 10:43 am

ok I'd like to clarify a little about what was machined on the DOHC RS manifold... I did the machining myself.

The throttle body mounting surface was machined 1/2 of an inch

The throttle body itself was also machined 1/8 of an inch.

Also once I completed the machining, I noticed that the throttle linkage couldn't open 100%, so I ended up machining the linkage, and one of the intake runners to rectify this.

All of these mods were to allow just that little extra room for a top mount intercooler

Heres a few pictures of the finished product, after it was stripped, cleaned, and painted

The coil pack, injectors & rails, coolant reservoir, and my custom fuel manifold are NOT included.

The EGR Valve, Control Solenoid, and weird disk thing are included

BSOD2600 · Post by **BSOD2600** » Thu Jan 25, 2007 2:16 am

1) would that ECM work for a 94 turbo wagon? and if so,
2) how much would you sell it for?

DTSJR · Post by **DTSJR** » Thu Jan 25, 2007 5:15 am

Is the JDM TD04 the same as the WRX turbo, just with a 90 degree inlet?

Splinter · Post by **Splinter** » Thu Jan 25, 2007 7:10 am

DTSJR wrote:Is the JDM TD04 the same as the WRX turbo, just with a 90 degree inlet?

Yes

Splinter · Post by **Splinter** » Thu Jan 25, 2007 7:11 am

BSOD2600 wrote:1) would that ECM work for a 94 turbo wagon? and if so,
2) how much would you sell it for?

I need the case from the ECU to put my new ECU into, so I could only sell you the actual board. But you can put it into the case of your fried ECU

I dunno

50 bucks?

RS25 · Post by **RS25** » Sat Jan 27, 2007 11:53 am

may as well bump this thread.. cause some of my stuff is on it

RS25 · Post by **RS25** » Sat Jan 27, 2007 11:55 am

RS25 wrote:may as well bump this thread.. cause some of my stuff is on it

cause I'll need to sell some stuff cause now revenue canada wants almost 700 back from me for last years tax return.. due mid FEB

Splinter · Post by **Splinter** » Thu Feb 01, 2007 6:17 am

Guys I really need to get rid of this stuff, Ill take offers.. I dont want to throw any of this stuff away!

wallgood358 · Post by **wallgood358** » Thu Feb 01, 2007 8:06 am

I am very interested in the IC shipped to 85719. And am curious about the nipple on the end of the intake tube. Is that the line for the BOV? And by chance do you have the complete hose set up you mig be willing to throw in for a slightl raise in the price?

555BCTurbo · Post by **555BCTurbo** » Thu Feb 01, 2007 8:14 am

If the guy above me doesn't get the Intercooler I will take it

wallgood358 · Post by **wallgood358** » Thu Feb 01, 2007 8:18 am

I have been on the hunt for an old school IC, so i dont think i will pass it up...lol

Splinter · Post by **Splinter** » Thu Feb 01, 2007 10:01 am

wallgood358 wrote:I am very interested in the IC shipped to 85719. And am curious about the nipple on the end of the intake tube. Is that the line for the BOV? And by chance do you have the complete hose set up you mig be willing to throw in for a slightl raise in the price?

Its for a BOV ya

ANd no, we dont have the hoses, my roomie ganked it from a junkyard modded legacy and didnt take the hoses as he was going to be using it on a different setup. Get a shipping quote for you tomorrow

bepa · Post by **bepa** » Thu Feb 01, 2007 1:05 pm

interested in engine mounts, also possible front diff. what size gearing if you know it?

good luck with sell. did blackbart get his pedal box?

oh yea what turbo intake tubing are you talking about?

and prices to ship to 10463 if you could.

be well, Daniel

Splinter · Post by **Splinter** » Thu Feb 01, 2007 1:11 pm

Its a 3.9, from a turbo.

Blackbart is taking the pedal box and the a-pillar trim

Ill get shipping quotes today

thanks guys!

belladonna · Post by **belladonna** » Thu Feb 01, 2007 11:56 pm

that turbo is looking mighty tempting...what color is the interior? i need a rear deck

(i acquired a ss spoiler and don't need the third brakelight in the interior anymore)

Splinter · Post by **Splinter** » Fri Feb 02, 2007 2:08 am

Dark grey

Ive got some pictures to take tonight, Ill see if I can snap one of that.

belladonna · Post by **belladonna** » Fri Feb 02, 2007 4:28 am

ugh...i have the tan interior...grrr...my hunt continues for the rear deck! thank you

Splinter · Post by **Splinter** » Fri Feb 02, 2007 4:43 am

I think Ive answered all the PMs. Give me a shout again if I missed you, Im dealing with a lot

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

92 SS Interior partout + more (Good stuff for 5MT swap)

92 SS Interior partout + more (Good stuff for 5MT swap)

parts