92 SS Interior partout + more (Good stuff for 5MT swap)

bepa · Post by **bepa** » Fri Feb 02, 2007 6:56 am

[quote="belladonna"]ugh...i have the tan interior...grrr...my hunt continues for the rear deck! thank you[/quote]

I have to check to see what color mine is. if I have it in tan, you can name your own price, plus shipping. D

Dynamic Entry · Post by **Dynamic Entry** » Fri Feb 02, 2007 9:28 am

What kind of paint is suitable to paint the manifold like that?

Splinter · Post by **Splinter** » Fri Feb 02, 2007 10:08 am

Brake caliper paint or engine enamel

RS25 · Post by **RS25** » Fri Feb 02, 2007 12:01 pm

if you do paint your manifold.. make sure you cure the paint with heat.. I used the outside BBQ, cured it for 1hr30mins at 300deg celcius.. works excellent, and the paint doesn't chip nearly as easy.

RS25 · Post by **RS25** » Fri Feb 02, 2007 8:27 pm

in response to some pm's about the wheels, heres some pictures of them. sorry about the quality of the photo's being as though all I have at my disposal is my camera phone.. as you can see on a few of the rims, the center section is scratched on almost every wheel, and the polished sections need to be re-polished.. nothing a little time and effort won't fix. I wasn't going to worry too much about the finish on them as I was going to use them primarily for gravel rally-x anyways..

*edit, removed pictures for wheels, to save room

RS25 · Post by **RS25** » Sat Feb 03, 2007 1:25 am

slant style intercooler sold. Its in the mail, thanks for your purchase

shemoves · Post by **shemoves** » Sun Feb 04, 2007 8:39 am

any interior bits? looking for the plastic piece that surrounds the shift lever.

Splinter · Post by **Splinter** » Sun Feb 04, 2007 8:49 am

shift lever and trim is spoken for at this point, Ill let you know if it falls through

americanyouth · Post by **americanyouth** » Sun Feb 04, 2007 7:43 pm

That is a gorgeous intake - how did you clean it?

RS25 · Post by **RS25** » Mon Feb 05, 2007 1:03 am

americanyouth wrote:That is a gorgeous intake - how did you clean it?

a HELL of a lot of elbow grease, w/superclean, small wire brush, time, and patience

.

but thanks for the comment

tris91ricer · Post by **tris91ricer** » Wed Feb 07, 2007 6:23 am

if you are still planning on coming to the meet, I'll give you asking price for the red manifold. just a question, though: does it really work with legacy turbo stuff? Only works with dohc, too, right?

Splinter · Post by **Splinter** » Wed Feb 07, 2007 7:04 am

The red manifold only works with RS25 heads as far as I know

RS25 · Post by **RS25** » Thu Feb 08, 2007 9:41 am

yes, the red manifold only works with the DOHC EJ25 N/A heads..

essentially, this is the intake manifold that you read about on this cite for doing the ej22t dohc swap..

tris91ricer · Post by **tris91ricer** » Thu Feb 08, 2007 11:16 pm

mmmmm. . . Nevermind, then

RS25 · Post by **RS25** » Sat Feb 17, 2007 1:59 am

wheels are sold on Nasioc.. and.. bump.. we need to get rid of this stuff

shemoves · Post by **shemoves** » Sat Feb 17, 2007 7:58 pm

willing to sell just the MAF sensor?

BSOD2600 · Post by **BSOD2600** » Mon Feb 19, 2007 9:02 pm

Do you have the stock BOV I could get for my 94 turbo legacy?

boro · Post by **boro** » Sat Feb 24, 2007 7:50 pm

condition/miles on the heads?

and shipping to 63043 USA if you please.

THANKS!

RS25 · Post by **RS25** » Sun Feb 25, 2007 5:21 am

BSOD2600.. I'm sure we could accomidate you for the Bypass Valve.. I know I've got 2 of them and Splinter I believe has one

Boro.. Condition of the heads are.. Leaking oil as per usual, mine have 200Km's on them and are in good shape. They were taken off of my donor block in good running condition. They are complete, heads, cam, valve covers, etc.. I'll try and find out about shipping next week.. (prolly either mon-wed) unless there is a rush on them.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

92 SS Interior partout + more (Good stuff for 5MT swap)

rear deck lid