Does anyone have a list of instructions to replace the purge valve? It looks pretty well buried behind the a/c compressor. I'm not sure how much stuff I have to remove to get to it and I'd hate to make too much work for myself if there is an easy way to get at it.
Thanks.
Purge Valve Install Q's
Moderators: Helpinators, Moderators
Purge Valve Install Q's
Sold :-( My 1991 Sport Sedan EJ22t 4EAT
WRX Seats, K&N Panel Filter, 3" Turbo Back Exhaust
Current Subi: 1998 Legacy GT Wagon 5sp in the midst of an EJ257 STi swap with 6sp. Woohoo!
WRX Seats, K&N Panel Filter, 3" Turbo Back Exhaust
Current Subi: 1998 Legacy GT Wagon 5sp in the midst of an EJ257 STi swap with 6sp. Woohoo!
Umm.......
I have changed that one twice on my car. Its a turbo. I got it from the back of the manifold. You have to take the turbo to throttle body piping. I use a 16" extention with a swivel on the end. A pain in the ass to get to, but nothing else had to be removed.
Oh, the secret to putting the bolt back in is put it in the socket, and putting a piece of tape around it to hold it in.
It was taken for this thread: http://bbs.legacycentral.org/viewtopic. ... highlight=
Hope it helps
I have changed that one twice on my car. Its a turbo. I got it from the back of the manifold. You have to take the turbo to throttle body piping. I use a 16" extention with a swivel on the end. A pain in the ass to get to, but nothing else had to be removed.
Oh, the secret to putting the bolt back in is put it in the socket, and putting a piece of tape around it to hold it in.
It was taken for this thread: http://bbs.legacycentral.org/viewtopic. ... highlight=
Hope it helps
1994 ABM Sport Sedan-Not stock
1990 L series/turbo-Rally project
1990 L series/turbo-Rally project
Are you talking about the canister purge solenoid?
It's not on the same side as the AC compressor. It's on the passenger side under the intake manifold.
It's not on the same side as the AC compressor. It's on the passenger side under the intake manifold.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
I need to change mine as well.
I tried a long extension with a u-joint, but still couldn't get to it. Then again, I didn't remove my intercooler.......
I tried a long extension with a u-joint, but still couldn't get to it. Then again, I didn't remove my intercooler.......
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS