Snorkus, filters, throttle bodies and intake manifolds.
Moderators: Helpinators, Moderators
-
Splinter
- Knowledgeable
- Posts: 3058
- Joined: Tue Aug 02, 2005 11:12 pm
- Location: Victoria, BC
Post
by Splinter »
Has anyone tried this? Looking at it, I dont see any reason why it couldnt be done...
98 Steel Widebody RSTi-RA Superbeast
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
Post
by IronMonkeyL255 »
What about the PS pump?
That'd be the main problem, IMO
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
Splinter
- Knowledgeable
- Posts: 3058
- Joined: Tue Aug 02, 2005 11:12 pm
- Location: Victoria, BC
Post
by Splinter »
PS is for wimps
98 Steel Widebody RSTi-RA Superbeast
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
Post
by IronMonkeyL255 »
BTW, what's the other engine back there?
Red manifold and gold valve covers.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
legacymax
- Second Gear
- Posts: 335
- Joined: Fri Feb 28, 2003 7:28 pm
- Location: lakewood, colorado
Post
by legacymax »
remember fuel lines. I think 97+ ej20 intake has a higher clearance for the under manifold intake.
-max
94 legacy Silver Touring Wagon now w/ 5spd, Ground Controls, ej20g, rear VLSD, td05, and edms.
95 impreza Rally car. 3.0 H6
88 Toyota fj62 OME lift.
-
Splinter
- Knowledgeable
- Posts: 3058
- Joined: Tue Aug 02, 2005 11:12 pm
- Location: Victoria, BC
Post
by Splinter »
IronMonkeyL255 wrote:BTW, what's the other engine back there?
Red manifold and gold valve covers.
RS25's EJ22T/EJ207 hybrid
The manifold and valve covers are painted, not factory
98 Steel Widebody RSTi-RA Superbeast
-
Splinter
- Knowledgeable
- Posts: 3058
- Joined: Tue Aug 02, 2005 11:12 pm
- Location: Victoria, BC
Post
by Splinter »
legacymax wrote:remember fuel lines. I think 97+ ej20 intake has a higher clearance for the under manifold intake.
-max
I can bend up new fuel lines if necessary
98 Steel Widebody RSTi-RA Superbeast
