Forged ej22T part-out
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
-
- Third Gear
- Posts: 743
- Joined: Wed Oct 30, 2002 12:55 am
- Location: Quebec City / Canada
- Contact:
Forged ej22T part-out
Hi,
i'm parting out my engine. here's what i got to offer :
Ej22T shortblock, has been rebuilt with forged CP pistons (2618 alloy), Eagle rods, balanced. The engine ran ~45 000km since the build, and still runs great.
EJ20(K or H) (Legacy TwinTurbo 97) heads... 8.1mm valve lift, shims over bucket valve adjustment, so alot better than ej20g heads .
'96 intake manifold.
'02 WRX intercooler
'96 TD05-16G turbo with 40 000km on it (Has been rebuilt before install).
SDS-EFI EM-3 engine management.
With this setup, on 12psi boost the engine was pretty powerfull, with +300hp specs.
I'll remove it from the car around march 3rd. I'll get back with some prices.
i'm parting out my engine. here's what i got to offer :
Ej22T shortblock, has been rebuilt with forged CP pistons (2618 alloy), Eagle rods, balanced. The engine ran ~45 000km since the build, and still runs great.
EJ20(K or H) (Legacy TwinTurbo 97) heads... 8.1mm valve lift, shims over bucket valve adjustment, so alot better than ej20g heads .
'96 intake manifold.
'02 WRX intercooler
'96 TD05-16G turbo with 40 000km on it (Has been rebuilt before install).
SDS-EFI EM-3 engine management.
With this setup, on 12psi boost the engine was pretty powerfull, with +300hp specs.
I'll remove it from the car around march 3rd. I'll get back with some prices.
morgie
'98 4Runner V6 Manual 4x4.
'98 4Runner V6 Manual 4x4.
-
- quasi-mod-o
- Posts: 6000
- Joined: Thu Dec 05, 2002 7:06 pm
- Location: Tampa, FL
Holy shit! Morgie! Where have you been man?
You built such a beautiful car, what happened?
Is the motor complete as a long block, or have you torn it down?
You built such a beautiful car, what happened?
Is the motor complete as a long block, or have you torn it down?
2000 Subaru Legacy B4 RSK
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"
*Formerly DerFahrer*
@entirelyturbo on social media, including Facebook, Instagram, Twitter, and TikTok
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"
*Formerly DerFahrer*
@entirelyturbo on social media, including Facebook, Instagram, Twitter, and TikTok
I definately would be interested in the heads pending a reasonable price.
Last edited by dzx on Tue Feb 20, 2007 4:31 am, edited 1 time in total.
///M
'93 Legacy SS - part out
'93 Legacy SS - part out
-
- In Neutral
- Posts: 29
- Joined: Mon Feb 19, 2007 6:28 pm
-
- Second Gear
- Posts: 277
- Joined: Tue Sep 07, 2004 9:31 pm
- Location: Buffalo, NY
- Contact:
-
- quasi-mod-o
- Posts: 2574
- Joined: Sun Nov 09, 2003 8:24 pm
- Location: Ghetto Garage, CO, USA
- Contact:
That's what I was thinking. Who is this Morgie fellow?subyluvr2212 wrote:Holy shit! Morgie! Where have you been man?
You built such a beautiful car, what happened?
Is the motor complete as a long block, or have you torn it down?
1974 Porsche 914 Cam Am Limted Edition AKA the Bumble Bee
1973 Porsche 914 2.0 l -Suby swap pending
1968 Porsche 911t survivor 47k original miles
2000 2.5RS daily driver.
1999 2.5RS w/ 50+ extra whp
Suby Hai!
1973 Porsche 914 2.0 l -Suby swap pending
1968 Porsche 911t survivor 47k original miles
2000 2.5RS daily driver.
1999 2.5RS w/ 50+ extra whp
Suby Hai!
-
- Third Gear
- Posts: 743
- Joined: Wed Oct 30, 2002 12:55 am
- Location: Quebec City / Canada
- Contact:
Hi ! well, the car ran great so I had plently of time to concentrate on other things, like my work and stuff hehesubyluvr2212 wrote:Holy shit! Morgie! Where have you been man?
You built such a beautiful car, what happened?
Is the motor complete as a long block, or have you torn it down?
Engine is still completely assembled.
Here are the prices i'm looking for. Of course, everything may be negociable :
The complete engine (longblock.. heads, intake manifold, turbo) : 2500$ CAD
Only the ShortBlock : 2000$ CAD
SDS EFI em-3 engine management : 500$ CAD
STI V4 4.44 transmission + rear lsd diff + 2 ... axle shafts(? french : cardans) : 1500$ CAD
TD05-16G (if not sold in longblock) : 300$ CAD
TwinTurbo Heads + intake + throttle Body (if not sold in longblock): 300$ CAD
WRX '02 TMIC with short Y piping (if not sold in longblock) : 100$ CAD obo.
morgie
'98 4Runner V6 Manual 4x4.
'98 4Runner V6 Manual 4x4.
I'll take the heads from you. what would be involved with making the computer to work with the legacy, and how difficult is it to tune?
Last edited by dzx on Wed Mar 14, 2007 9:59 pm, edited 1 time in total.
///M
'93 Legacy SS - part out
'93 Legacy SS - part out
-
- Moderator
- Posts: 9026
- Joined: Thu Jan 29, 2004 8:47 pm
- Location: Maryland www.andrewtechautomotive.com
- Contact:
Wow, The Morgie!
It's been a REAL long time! I remember reading your build list when I was a greenhorn here, and Boostjunkie was still around!
It's been a LONG time.
Good to hear your doing well and that you've got a pimp sounding WRX.
It's been a REAL long time! I remember reading your build list when I was a greenhorn here, and Boostjunkie was still around!
It's been a LONG time.
Good to hear your doing well and that you've got a pimp sounding WRX.
2009 Outback 2.5XT. 5MT. Satin White Pearl.
2009 Impreza 2.5i Premium. Blue.
[quote="scottzg"]...I'm not a fan of the vagina...[/quote][quote="evolutionmovement"]This will all go much easier if people stop doubting me.[/quote]
2009 Impreza 2.5i Premium. Blue.
[quote="scottzg"]...I'm not a fan of the vagina...[/quote][quote="evolutionmovement"]This will all go much easier if people stop doubting me.[/quote]
-
- Third Gear
- Posts: 743
- Joined: Wed Oct 30, 2002 12:55 am
- Location: Quebec City / Canada
- Contact:
hehe yeah I remember a lot of you too It's been quite a while... But i still talk about the forum to friends who ask questions as beeing _The_ place to get real good infosBAC5.2 wrote:It's been a REAL long time! I remember reading your build list when I was a greenhorn here, and Boostjunkie was still around!
Beeing a complete stand-alone computer, you basically only have to hook 7 wires and you're ready for actions. Tuning it is also pretty simple, hook a wideband for one or two hours of air/fuel tuning, and you're almost done. And since you live in L.V. you wont really have problems with cold-starts at bellow 20 celcius...dzx wrote:I'll take the heads from you. what would be involved with making the computer to work with the legacy, and how difficult is it to tune?
morgie
'98 4Runner V6 Manual 4x4.
'98 4Runner V6 Manual 4x4.
If i remember correctly I think from one of your posts a long time ago, you have to put magnets on the crank sprocket or maybe i read that somewhere else. Do you have a way to easily mount the crank sensor? I'll probably take the computer off your hands as well.
Last edited by dzx on Thu Mar 15, 2007 8:08 am, edited 1 time in total.
///M
'93 Legacy SS - part out
'93 Legacy SS - part out
-
- Second Gear
- Posts: 277
- Joined: Tue Sep 07, 2004 9:31 pm
- Location: Buffalo, NY
- Contact:
-
- Third Gear
- Posts: 743
- Joined: Wed Oct 30, 2002 12:55 am
- Location: Quebec City / Canada
- Contact:
Yep, the sds needs 3 magnets on the crank pulley and a HAL Sensor positionned correctly to operate. This pulley + mouting braket is included in the kit.dzx wrote:If i remember correctly I think from one of your posts a long time ago, you have to put magnets on the crank sprocket or maybe i read that somewhere else. Do you have a way to easily mount the crank sensor? I'll probably take the computer off your hands as well.
It was balanced to 10 000rpms. The prices listed above are still good, depending on what you takeInnovative Tuning wrote:What was the engine balanced up to? If it's still for sale what's the current asking price?
morgie
'98 4Runner V6 Manual 4x4.
'98 4Runner V6 Manual 4x4.