Tein hood dampers

Anything and Everything about the Body, from paint to undercoating and interior, including in-car entertainment (ICE).

Moderators: Helpinators, Moderators

Post Reply
The Scooby
Second Gear
Posts: 492
Joined: Fri Jul 23, 2004 7:32 am
Location: Seattle, Washington

Tein hood dampers

Post by The Scooby »

for a 02 + WRX dont work for our cars. i grabed a set today from work to see if they would for. got it all together and it only shut about half way... suckage... so im selling them to a buddy and im gonna take the SS into work once i get it fixed (dam oil pump) and see if i can get my new blitz BOV on, some hood struts, invidia downpipe, FMIC, Apex-I AFC, Tein S. techs, whiteline rear swaybar.

hopfully if all the parts come in in the next week my car will be done other then the 6sp swap, and paint.
1999 Impreza Outback Sport w/ MY02 WRX complete swap


1986 GL wagon
EJ'ed and Lifted
siouxbe
First Gear
Posts: 98
Joined: Wed Feb 22, 2006 10:01 pm
Location: Lat. 40.02 North/ Long 105.25 West/ Elev. 5356 ft. People's Rep. of Boulder

Post by siouxbe »

I encountered the same thing.
I see that Tein makes one for the '95-'99 era Legacy
perhaps it will fit my '91 BF Leggy
1991 Subaru Legacy BJ 2.2L/2.5LSTi Block Hybrid N/A w/ over 250,000 miles! 1992 Yamaha Seca II 2004 Dyna Super Glide My other car is a Go Kart Redhair...Black Leather...My favourite colour schemes. If it's not Scottish...it's Crap!
sybir
In Neutral
Posts: 23
Joined: Tue Mar 16, 2004 3:05 pm
Location: Das Boonies, NorCal
Contact:

Post by sybir »

My BG is in the shop, but has one of the only sets of BD/BG struts in the country, heh.
I'll do some measurements and compare them to my 92 SS when I get her home. The BG hood strut extension (same damper size, it's jsut the tapering aluminum sleeve that changes) is about 4-5 inches longer than the WRX becuase it mounts way farther forward.
Post Reply