diagnostic connectors not there!
Moderators: Helpinators, Moderators
diagnostic connectors not there!
im trying to get to the route of why my CEL comes on at highway speeds, i was told it was the speed sensor because of my swap to a 5mt in a 93 turbo wagon. the green connectors are there but wont give me code when i d check it. The black ones are not there. what the hell is all this about? anyone have any ideas?...and believe me there ARE NOT there
They are there. Where are you looking for the black connectors? Some people have said they are on the other side of the steering column.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
its possible they are not there. the 93 SS i bought was missing the connectors, i only compared the wires with my other turbo car, and then found the wires eventually, and indeed, the connectors were mia, that car, mysteriously also had a wire running from the fuse box to the coil pack, i never did figure that one out.....i removed it and car still runs ok
91 Legacy Sport Sedan 4eat
91crx si 165k
91 Civic RT4WD manual trans 168k
91crx Si 40.5k
85 BRAT Gl 140
97 SVX 74k
91crx si 165k
91 Civic RT4WD manual trans 168k
91crx Si 40.5k
85 BRAT Gl 140
97 SVX 74k