o2 Sensor Question

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
scoobydude
In Neutral
Posts: 25
Joined: Sun May 27, 2007 5:48 am
Location: Roseville, CA

o2 Sensor Question

Post by scoobydude »

So my Downpipe has no spot for an o2 sensor. And i would like to in the near future get a catless downpipe. Would there be anything wrong with relocating my o2 Sensor to right after where my downpipe connects? Thanks for the help!
Top
NICO
Knowledgeable
Knowledgeable
Posts: 2013
Joined: Fri May 09, 2003 10:41 pm
Location: Hamilton Ontario Canada

Post by NICO »

no problem at all
1993 Subaru Legacy 44B STi 4Cam 16Valve Turbo Intercooled AWD
EJ22T, STi EJ207 DOHC, Vi-PEC (Spare Autronic) @ 426.20HP / 394.94ft lb @ 00psi
Tuned By: Franz Diebold ( DIEBOLD AUTOSPORT ) @ NVauto
Top
gto7419
Second Gear
Posts: 483
Joined: Wed Dec 13, 2006 10:53 pm
Location: Long Island, NY

Post by gto7419 »

A catless downpipe should have room for an 02 sensor. I would wait until I got the new downpipe to install the sensor... I hate doing double work...

Like Nico said, you should be ok as long as you are far enough away from the turbo and before the cat...


What downpipe are you thinking of getting?

Danny
500cc Shifterkart, 125cc Shifterkart, 01 MX5, 93 Legacy Wagon (DIY Turbo)
Top
scoobydude
In Neutral
Posts: 25
Joined: Sun May 27, 2007 5:48 am
Location: Roseville, CA

Post by scoobydude »

I wish i could get the Downpipe right now. I just need a fix for now because i cant smog it without the o2 Sensor. Its running too rich. As far as for a downpipe i will prob just have one made. Or if i can find a used WRX one for a pretty good price i might do that.
Top
Post Reply

Return to “Engine”