I'm trying to inspect the front brakes on my 91. Do you have to remove the 32mm center nut just to get the wheel off?
I've got all the lugnuts off but the wheel won't budge (kicked it a few times as well).
Thanks
Front wheels
Moderators: Helpinators, Moderators
It's lugs only.
Kick harder, or maybe put the lugs back on but not tightly and put some weight on the wheel and roll the car back and forth to get the wheel to let go.
Kick harder, or maybe put the lugs back on but not tightly and put some weight on the wheel and roll the car back and forth to get the wheel to let go.
Legacy Central
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
2001 Legacy Outback Wagon | 2005 OB XT LTD | 1997 Legacy Outback Limited | 1998 Legacy L Wagon | 2000 GT Limited | 93 Legacy Touring Wagon 5MT | 90 Legacy L+
-
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
I have occasionally had to take a deadblow hammer to the backside of the wheel to get it to come off.
Just be sure to have something to pad the wheel from the blows. My deadblow is covered in rubber......
Just be sure to have something to pad the wheel from the blows. My deadblow is covered in rubber......
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS