Anyone have one of the MRT aluminum chargepipes for the v2 slanty i/c that they'd like to sell? I want to install a TD05-16G in my '92 ss and I'd rather not hack up a good factory pipe if I can avoid it.
Jeff
looking for aluminum chargepipe for v2 slanty i/c
Moderators: Helpinators, Moderators
-
rockethound
- First Gear
- Posts: 52
- Joined: Sun Mar 06, 2005 10:52 pm
- Location: Mount Vernon, Washington
-
greg donovan
- Fourth Gear
- Posts: 1947
- Joined: Fri Oct 03, 2003 6:22 pm
- Location: Fargo, ND
these are pretty tricky to find from what i have seen. right up there with the AVO charge pipe.
the used one i bought (but havent installed yet) came with a straight piece of tubing welded to a 90* on a plate to fit the inlet for the IC. the pipe also had a fitting wleded on it for the recirc valve. all i need to do is figure out how to connect the pipe to the turbo.
good luck.
the used one i bought (but havent installed yet) came with a straight piece of tubing welded to a 90* on a plate to fit the inlet for the IC. the pipe also had a fitting wleded on it for the recirc valve. all i need to do is figure out how to connect the pipe to the turbo.
good luck.
96 Impreza L sedan
97 legacy outback limited
00 Impreza RS sedan
97 legacy outback limited
00 Impreza RS sedan
I might have a "slanty" intercooler for sale soon. I recently bought a 93 legacy SS with one installed on it. I really don't like the way it fits in this car nor the way it lines up with the hood scoop.
I am working in sourcing a WRX TMIC locally. I have seen these mounted in these cars before and they seam to line up pretty well when done right.
I will let you know.
I am working in sourcing a WRX TMIC locally. I have seen these mounted in these cars before and they seam to line up pretty well when done right.
I will let you know.