WTB: plastic oil line
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
WTB: plastic oil line
The one im taking about is the one that runs under the intake and it runs along side the fuel lines and it has a nipple in about the center of the motor where it connects to the motor. Anyone have one of theses that is not broken and they wanna sell me?
-Aaron
93 Imp wag, 94 Imp wag WRX swap, 99 Imp Sedan WRX swap, 01 Imp Outback Sport, 05 Outback XT, 00 Outback, 98 Outback, 93 Leg touring, 93 Leg wag, 94 Leg wag lifted ej22t swap, 79 Brat 4x4 EA81 4spd d/r swap, 97 Crown Vic lifted
93 Imp wag, 94 Imp wag WRX swap, 99 Imp Sedan WRX swap, 01 Imp Outback Sport, 05 Outback XT, 00 Outback, 98 Outback, 93 Leg touring, 93 Leg wag, 94 Leg wag lifted ej22t swap, 79 Brat 4x4 EA81 4spd d/r swap, 97 Crown Vic lifted
-
Threshld1
- Second Gear
- Posts: 529
- Joined: Mon Dec 26, 2005 12:53 am
- Location: Artic Tundra - MN
- Contact:
I do believe you are talking about the front crank vent line. Its a plastic line running from a vent on the front of the block by the oil pressure sender to both heads correct? The one that shatters into 500 pieces if you touch it. Its got nothing to do with oil, its just an extra vent for the crank to prevent pressure buildup at high rpms. I just replaced it with 1/2" heater hose and a T-fitting.
93 SS 5MT - TD05H-16G, 06 TMIC, Walbro, Zeitronix WB-02 - Scrapped too much rust
91 SS AT
97 Outback - Prodrive quick rack, DMS 40
91 SS AT
97 Outback - Prodrive quick rack, DMS 40
