part# for a conefilter?

Snorkus, filters, throttle bodies and intake manifolds.

Moderators: Helpinators, Moderators

Post Reply
Redlined
Fourth Gear
Posts: 1070
Joined: Tue Apr 12, 2005 7:00 am
Location: Portland, OR

part# for a conefilter?

Post by Redlined »

Went to the local Baxters Auto and got some new spark plugs, ( MPH is down to 24 and it idles rough) while I was standing around waiting for a clerk I spied some conefilter systems (K&M) Asked and the clerk said I would need a parts number....

I was kinda thinking Id just need the OD for the MAS.

"searched" a little bit in the forums but came up dry.

Anyone able to offer me a little help?

Thanks in advance!
Dave
_________________
1993 Legacy Sport Sedan 4EAT "Angel" *sold*
Top
Legacy777
Site Admin
Site Admin
Posts: 27926
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Contact Legacy777

Post by Legacy777 »

Part # for what? The cone filter?

They're pretty much generic. Just get one that fits in the physical opening you have, and has the same pipe diameter.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Top
ramathorn
First Gear
Posts: 110
Joined: Wed Aug 02, 2006 10:35 pm
Location: Yakima, WA

Post by ramathorn »

crap i just tossed the box i think that had the part number on it. goto the k&n website and check it for the part number.
Top
ramathorn
First Gear
Posts: 110
Joined: Wed Aug 02, 2006 10:35 pm
Location: Yakima, WA

Post by ramathorn »

schweet. i diddnt toss it i jut set in in the recycle bin.

k&n part # RU-3570
Top
MotionMan24
In Neutral
Posts: 7
Joined: Mon Aug 13, 2007 3:41 pm

Post by MotionMan24 »

Part for what? I just picked up a 3" part that would bolt onto the MAS, drilled the holes to fit the legasy and bolted it on then stuck the airfilter right on it. VOY LE
The Frankenstein 93 legacy wagon
Top
Post Reply

Return to “Intake”